Analytical Expression for Daily Solar Profiles
Introduction: This International Standard provides module manufacturers, installers and users with a means for synthesizing solar irradiance profiles. These profiles can be used as a reference in conjunction with user-supplied performance simulation programs for sizing and comparing photovoltaic systems. They can also be used in tenders or proposals. NOTE – To compare PV systems, perform system sizing and evaluate specific PV system performance, other parameters such as ambient temperature, wind speed, spectral irradiance distribution and PV device characteristics are required.
Scope: This procedure provides a normative equation for analytically deriving a set of data points or a curve of irradiance versus time of day for a synthetic solar day. The coefficients of the normative equation for the analytical solar irradiance profiles are determined from measured or estimated values of maximum solar irradiance, daily solar irradiation and the number of daylight hours. These three input data define the curve of the analytical solar irradiance profiles. Depending on the objectives, these data may represent, for example, the worst winter day of a certain place, or the average day of a summer season, etc. CAUTION – While the results from the normative equation match measured clear sky data reasonably well, it is not intended to predict or simulate a real day. A daily solar irradiance profile is defined based on user-selected values for peak irradiance, daily irradiation and total daylight hours. 2 Definitions The following symbols are defined and illustrated in figure 1: solar irradiance, W⋅m–2 Gmax = the desired maximum solar irradiance at solar noon (t = 0), W⋅m–2 daily solar irradiation, Wh⋅m–2 Hd the desired daily solar irradiation for the synthesized solar day profile, Wh⋅m–2 time of day –t0 time of sunrise +t0 time of sunset daylight hours (2⋅t0), hours Irradiance, G Gmax Irradiation, H Sunrise Sunset t = –t0 t = 0 t = +t0 h = 2⋅t0 Time of day Figure 1 – Definition of symbols IEC 676/97
Contents:
- FOREWORD
- INTRODUCTION
- Scope