IEC 61753-043-02-2022 PDF

IEC 61753-043-02-2022 PDF

Fibre optic interconnecting devices and passive components-Performance standard-Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C-Controlled environment

$132.41 $264.81 -50%
Product Code: IEC 61753-043-02
Stock In Stock
Edition: 1.0
Published: 08/2022
Number of Pages: 58
File Size: 1 file, 2 Bytes

Available Options

Product Description

Fibre optic interconnecting devices and passive components – Performance standard – Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C – Controlled environment

Introduction: Wavelength selective cords combine features and functions from cords as described in the IEC 61753-12x series and from filters as described in IEC 61977. Additional information about functional principle and application can be found in Annex D and Annex E. The cords consist of simplex fibre optic cable terminated at each end of the cable with single- mode fibre optic connector plugs with cylindrical ferrules. The operating wavelength range is between 1 260 nm and 1 660 nm. Short length cords are used as test samples as the attenuation of the cord and the temperature cycling performance will be affected by longer lengths of cable. It is important that any qualification of a cord whose length is greater than 5 m takes these factors into account. The relevant requirements for the mechanical interface of connector sets are covered by IEC 61754 (all parts). The relevant requirements for the optical interface of single-mode fibre optical connector sets are covered by IEC 61755 (all parts). The relevant requirements for performance of connector sets are covered by IEC 61753-1:2018. The relevant requirements for single-mode fibres are covered by IEC 60793-2-50. The relevant requirements for cables for cords are covered by IEC 60794-2-50.

Scope: This part of IEC 61753 specifies the test requirements for wavelength selective cords used in a controlled environment (category C) according to IEC 61753-1:2018, where the connectors already comply with the category C requirements of IEC 61753-1:2018. The tests selected are a subset of the connector tests from IEC 61753-1:2018 appropriate for requalification with additional requirements relevant to cords and the connector/cable interface.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61753-043-02-2022 PDF

IEC 61753-043-02-2022 PDF

$132.41 $264.81