IEC 61753-131-3-2010 PDF

IEC 61753-131-3-2010 PDF

Fibre optic interconnecting devices and passive components-Performance standard-Part 131-3: Single-mode mechanical fibre splice for category U-Uncontrolled environment

$72.51 $145.02 -50%
Product Code: IEC 61753-131-3
Stock In Stock
Edition: 1.0
Published: 01/2010
Number of Pages: 39
File Size: 1 file, 435 Bytes

Available Options

Product Description

Fibre optic interconnecting devices and passive components – Performance standard – Part 131-3: Single-mode mechanical fibre splice for category U – Uncontrolled environment

Introduction: This part of IEC 61753 for mechanical splices defines the requirements for standard optical performance under a set of specified conditions. The standard contains a series or a set of tests and measurements with clearly stated conditions, severities and pass/fail criteria. The series of tests, commonly referred to as an operating service environment or performance category, is intended to be a basis to prove the product’s ability to satisfy the requirements of a specific application, market sector or user group. A product that has been shown to meet all the requirements of this performance standard may be declared as complying with this performance standard. Products having the same classification from one manufacturer that satisfy this performance standard, will operate within the boundaries set by the performance standard. There is no guarantee that products from different manufacturers, having the same classification and which conform to the same performance standard, will provide an equivalent level of performance when they are used together. Conformance with IEC environmental policy according to IEC Guide 109 and concerning the need to reduce the impact on the natural environment of fibre management system products during all phases of their life – from acquiring materials to manufacturing, distribution, use, and end- of-life treatment (i.e. re-use, recycling (recovery and disposal)) are not part of this standard, but will be covered in the generic specification. Conform

Scope: This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a mechanical fibre splice will satisfy in order to be categorised as meeting the requirements of single-mode fibre splice for use in uncontrolled environments.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61753-131-3-2010 PDF

IEC 61753-131-3-2010 PDF

$72.51 $145.02