IEC 61754-10-2005 PDF

IEC 61754-10-2005 PDF

Fibre Optic Connector Interfaces - Part 10: Type Mini-MPO Connector Family

$72.51 $145.02 -50%
Product Code: IEC 61754-10
Stock In Stock
Edition: 2.0
Published: 07/2005
Number of Pages: 46
File Size: 1 file, 678 Bytes

Available Options

Product Description

Fibre Optic Connector Interfaces - Part 10: Type Mini-MPO Connector Family

Scope: This part of IEC 61754 defines the standard interface dimensions for the type Mini-MPO family of connectors. Description The parent connector for the type Mini-MPO connector family is a multiway plug connector characterized by a rectangular ferrule nominally 4,4 × 2,5 mm which utilises two pins of 0,7 mm diameter as its alignment. It is capable of joining up to four fibres by arraying them between two pin-positioning holes in the ferrule. The connector includes a push-pull coupling mechanism and a ferrule spring loaded in the direction of the optical axis. The connector has a single male key which may be used to orient and limit the relative position between the connector and the component to which it is mated. Connector interfaces are configured using a female plug without pins, a male plug with fixed pins and an adaptor as shown in Figure 1. The female plug is intermateable with the male plug. Interfaces This standard contains the following standard interfaces: Interface 10-1: Mini-MPO female plug connector angled interface – Push/pull consisting of: Interface 10-1-1 for single fibre Interface 10-1-2 for two fibres with a pitch of 0,25 mm Interface 10-1-3 for two fibres with a pitch of 0,75 mm Interface 10-1-4 for four fibres with a pitch of 0,25 mm Interface 10-2: Mini-MPO male plug connector angled interface – Push/pull consisting of: Interface 10-2-1 for single fibre Interface 10-2-2 for two fibres with a pitch of 0,25 mm Interface 10-2-3 for two fibres with a pitch of 0,75 mm Interface 10-2-4 for four fibres with a pitch of 0,25 mm Interface 10-3: Mini-MPO adaptor interface – Push/pull Interface 10-4: Mini-MPO female plug connector flat interface – Push/pull consisting of: Interface 10-4-1 for single fibre Interface 10-4-2 for two fibres with a pitch of 0,25 mm Interface 10-4-3 for two fibres with a pitch of 0,75 mm Interface 10-4-4 for four fibres with a pitch of 0,25 mm

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61754-10-2005 PDF

IEC 61754-10-2005 PDF

$72.51 $145.02