Electrical installations for aeronautical ground lighting at aerodromes – Part 1: Fundamental principles
Introduction: This document is part of IEC 61820, a series of standards that defines the requirements throughout the lifecycle of an Aeronautical Ground Lighting (AGL) system including design, installation, commissioning, maintenance, decommissioning and disposal. This document contains fundamental design requirements for AGL systems. According to ICAO or national standards, the AGL fixtures are subject to specific requirements for photometric output and serviceability level. The AGL system is provided to support airfield activities. Therefore, the focus of AGL system design is to maintain the lighting against any possible failure. This document pertains to personnel and operational safety.
Scope: This part of IEC 61820 covers principles of design and installation requirements for AGL systems including control, monitoring and transformation of energy, the cables and any electrical component utilized to produce the light intended to be used as a visual aid for air and ground navigation. This document defines in general the fundamental principles to provide safe, reliable and efficient operation of AGL systems independent of the particular system design. Where certain aspects of design are specific to a particular type of system (e.g. series-circuit), these are supplemented in the applicable part. NOTE Local / national regulations can be different from the provisions of this document.
Contents:
- FOREWORD
- INTRODUCTION
- Scope