Communication networks and systems for power utility automation – Part 7-3: Basic communication structure – Common data classes
Introduction: This document is part of a set of specifications, that details layered substation communication architecture. This architecture has been chosen to provide abstract definitions of classes and services such that the specifications are independent of specific protocol stacks and objects. The mapping of these abstract classes and services to communication stacks is outside the scope of IEC 61850-7-x and may be found in IEC 61850-8-x (station bus) and IEC 61850-9-x (process bus). IEC 61850-7-1 gives an overview of this communication architecture. This part of IEC 61850 defines constructed attributed classes and common data classes related to applications in the power system using IEC 61850 modeling concepts such as substations, hydro power or distributed energy resources. These common data classes are used in IEC 61850-7-4 to define compatible dataObject classes. The SubDataObjects, DataAttributes or SubAttributes of the instances of dataObject are accessed using services defined in IEC 61850-7-2. This part of IEC 61850 is used to specify the abstract common data class and constructed attribute class definitions. These abstract definitions are mapped into concrete object definitions that are to be used for a particular protocol (for example MMS, ISO 9506 series).
Scope: 1.1 General This part of IEC 61850 specifies constructed attribute classes and common data classes related to substation applications. In particular, it specifies: common data classes for status information, common data classes for measured information, common data classes for control, common data classes for status settings, common data classes for analogue settings and attribute types used in these common data classes. This International Standard is applicable to the description of device models and functions of substations and feeder equipment. This International Standard may also be applied, for example, to describe device models and functions for: substation to substation information exchange, substation to control centre information exchange, power plant to control centre information exchange, information exchange for distributed generation, or information exchange for metering. 1.2 Namespace name and version This new section is mandatory for any IEC 61850 namespace (as defined by IEC 61850-7- 1:2011). The parameters which are identifying this new release of this namespace are: Namespace Version: 2007 Namespace Revision: B Namespace name: “IEC 61850-7-3:2007B” Namespace release: 3 Namespace release date: 2019-10-02 IEC 61850-7-3 depends on IEC 61850-7-2:2007B latest release. The table below provides an overview of all published versions of this namespace. IEC 61850-7-3:2010+AMD1:2020 CSV – 15 – IEC 2020 Edition Publication date Webstore Namespace Edition 1.0 2003-05 IEC 61850-7-3:2003 IEC 61850-7-3:2003 Edition 2.0 2010-12 IEC 61850-7-3:2010 IEC 61850-7-3:2007 Amendment 1 of Edition 2.0 2020-02 IEC 61850-7-3:2010/AMD1:2020 IEC 61850-7-3:2007B Edition 2.1 2020-02 IEC 61850-7-3:2010+AMD1:2020 CSV IEC 61850-7-3:2007B 1.3 Code Component distribution The Code Component will be available in light and full version: Full version will contain definition of the whole LNs defined in this standard with the documentation associated and access will be restricted to purchaser of this part. Light version will not contain the documentation but will contain the whole definition of the LNs as per full version, and this light version will be freely accessible on the IEC web
Contents:
- FOREWORD
- INTRODUCTION
- Scope