Electric vehicle conductive charging system – Part 1: General requirements
Introduction: This standard is the first part of the IEC 61851 series of standards that gives the general requirements for the supply2 of electric energy to Electric road vehicles 3. It is to be noted that the vehicle and the EV supply equipment2 make up a complete system that is covered by a number of IEC and ISO standards. IEC 61851 covers the mechanical, electrical, communications, EMC and performance requirements for EV supply equipment used to charge electric vehicles, including light electric vehicles. IEC 61851 is divided into several parts as follows: Part 1: General Requirements, This document gives the general requirements that serve as a basis for all the subsequent standards in the series. It includes the requirements for AC EV supply equipment. Part 21-14: Electric vehicle onboard charger EMC requirements for conductive connection to an AC/DC supply. This part will cover requirements for EMC onboard the vehicle. Part 21-25: EMC requirements for OFF board electric vehicle charging systems. This part will cover all requirements for AC and DC EV supply equipment. EMC requirements for wireless power transfer systems (WPT) will not be included. Part 23: DC electric vehicle charging station (2014).This part covers the requirements for DC charging stations both permanently wired and cable and plug connected. Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging (2014). This part provides the requirements for communicati
Scope: This part of IEC 61851 applies to EV supply equipment for charging electric road vehicles, with a rated supply voltage up to 1 000 V AC or up to 1 500 V DC. and a rated output voltage up to 1 000 V AC. or up to 1 500 V DC. Electric road vehicles (EV) cover all road vehicles, including plug-in hybrid road vehicles (PHEV), that derive all or part of their energy from on-board rechargeable energy storage systems (RESS). This standard also applies to EV supply equipment supplied from on-site storage systems (e.g. buffer batteries). The aspects covered in this standard include: the characteristics and operating conditions of the EV supply equipment; the specification of the connection between the EV supply equipment and the EV; the requirements for electrical safety for the EV supply equipment. Additional requirements may apply to equipment designed for specific environments or conditions, for example: EV supply equipment located in hazardous areas where flammable gas or vapour and/or combustible materials, fuels or other combustible, or explosive materials are present; EV supply equipment designed to be installed at an altitude of more than 2 000 m; EV supply equipment intended to be used on board on ships; Requirements for electrical devices and components used in EV supply equipment are not included in this standard and are covered by their specific product standards. EMC requirements for EV supply equipment are expected to be covered in the future IEC 61851-21-26. Requirements for bi-directional energy transfer are under consideration and are not in this edition of IEC 61851-1. This standard does not apply to: safety aspects related to maintenance; charging of trolley buses, rail vehicles, industrial trucks and vehicles designed primarily for use off-road; equipment on the EV; EMC requirements for equipment on the EV while connected, which are covered in IEC 61851-21-1; Charging RESS off board of the EV; ____________ Under consideration. IEC 61851-1:2017 IEC 2017 – 15 – DC EV supply equipment that relies specifically on double/reinforced insulation or class III protection against electric shock. See IEC 61851-23 or the future IEC 61851-3 series. The IEC 61851 s
Contents:
- FOREWORD
- INTRODUCTION
- Scope