IEC 61853-2-2026 PDF

IEC 61853-2-2026 PDF

Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and nominal module operating temperature measurements

$239.59 $479.18 -50%
Product Code: IEC 61853-2
Stock In Stock
Edition: 2.0
Published: 08/2026
Number of Pages: 68
File Size: 1 file

Available Options

Product Description

Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and nominal module operating temperature measurements

Introduction: Photovoltaic (PV) modules are typically rated at standard test conditions (STC) of 25 °C cell temperature, 1 000 W m–2 total irradiance, normal incidence and air mass (AM) 1,5 spectrum. However, PV modules in the field operate over a range of temperatures, total and spectral irradiances, and incidence angles. Hence, PV modules can also be rated based on the calculated energy production under a standardized set of environmental and climatic conditions. This series proposes a standard method for energy rating and consists of four parts: IEC 61853-1: Irradiance and temperature performance measurements and power rating, which describes requirements for evaluating PV module performance in terms of power rating over a range of irradiances and temperatures; IEC 61853-2: Spectral responsivity, incidence angle, and nominal module operating temperature measurements, which describes test procedures for measuring the effect of varying angle of incidence and sunlight spectra as well as the estimation of module temperature from irradiance, ambient temperature, and wind speed; IEC 61853-3: Energy rating of PV modules, which describes the calculations for PV module energy ratings; and IEC 61853-4: Standard reference climatic profiles, which describes the standard time periods and weather conditions that can be used for the energy rating calculations.

Scope: The IEC 61853 series establishes IEC requirements for evaluating PV module performance based on power (watts), energy (joule or watthours) and performance ratio. It is written to be applicable to all PV technologies, including bifacial PV modules, but can be unsuitable for any technology where the module performance changes with time (e.g. modules change their behaviour with light or thermal exposure), or which experience significant non-linearities in any of their characteristics used for the modelling. The purpose of this second part of IEC 61853 is to define procedures for measuring the effects of angle of incidence of the irradiance on the output power of the device, to determine the operating temperature of a module for a specific set of ambient and mounting conditions and measure the spectral responsivity of the module. NOTE 1 In the IEC 61853 series, spectral responsivity measurements are used for calculating spectral correction factors, in combination with standardized and location-specific spectral irradiance data from Part 4. Then they are applied in the energy rating calculation described in Part 3 to account for mismatches from the reference AM1.5 spectrum with respect to what can be detected by a reference irradiance detector (e.g. a pyranometer). It is important to note that without spectral responsivity data, the resulting deviations in the energy rating calculation can be significant; however, spectral responsivity alone does not provide information on energy gains or losses. The described measurements are required as inputs into the module energy rating procedure described in IEC 61853-3 [28]1. Results of the measurements described in this part, however, can also be used for other purposes, where relevant, e.g. yield prediction with commercially available simulation tools that require spectral responsivity or angle of incidence effect. PV modules to be installed onto buildings (either as building integrated or as building applied photovoltaics, BIPV or BAPV, respectively) can exhibit very peculiar spectral, optical and thermal properties. This document can be applied for the energy rating of these modules and their specificity is illustrated in

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61853-2-2026 PDF

IEC 61853-2-2026 PDF

$239.59 $479.18