Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles
Introduction: This International Standard series establishes IEC requirements for determining PV module performance in terms of power (watts), specific module energy rating (kWh/kW) and climatic specific energy rating (dimensionless). It is written to be applicable to all PV technologies including non-linear devices. The methodology does not take into account either progressive degradation or transient behaviour such as light induced changes and/or thermal annealing. This series consists of four parts: IEC 61853-1: Photovoltaic (PV) module performance testing and energy rating – Part 1: Irradiance and temperature performance measurements and power rating, which describes requirements for evaluating PV module performance in terms of power (watts) rating over a range of irradiances and temperatures; IEC 61853-2: Photovoltaic (PV) module performance testing and energy rating – Part 2: Spectral responsivity, incidence angle, and module operating temperature measurements, which describes test procedures for measuring the effect of varying angles of incidence and sunlight spectra as well as the estimation of module temperature from irradiance, ambient temperature, and wind speed; IEC 61853-3: Photovoltaic (PV) module performance testing and energy rating – Part 3: Energy rating of PV modules, which describes the calculations for PV module ratings; and IEC 61853-4: Photovoltaic (PV) module performance testing and energy rating – Part 4: Standard reference climatic profiles, which describes the st
Scope: This part of IEC 61853 describes the standard reference climatic profiles used for calculating energy ratings. IEC 61853-1 describes requirements for evaluating PV module performance in terms of power (watts) rating. IEC 61853-2 describes test procedures for determining module temperature from irradiance, ambient temperature and wind speed, a method for measuring angle of incidence effects, and spectral responsivity. IEC 61853-3 describes the calculation of PV module energy rating values, using the data from IEC 61853-1, IEC 61853-2 and IEC 61853-4.
Contents:
- FOREWORD
- INTRODUCTION
- Scope