IEC 61869-15-2018 PDF

IEC 61869-15-2018 PDF

Instrument transformers-Part 15: Additional requirements for voltage transformers for DC applications

$163.93 $327.86 -50%
Product Code: IEC 61869-15
Stock In Stock
Edition: 1.0
Published: 07/2018
Number of Pages: 76
File Size: 1 file, 850 Bytes

Available Options

Product Description

Instrument transformers – Part 15: Additional requirements for voltage transformers for DC applications

Introduction: This document applies to voltage transformers (VT) intended to be used in DC applications with the following functions: measure DC voltage (with significant harmonics); withstand DC voltage. Two main technologies of DC converters exist today: LCC and VSC Line-commutated converters (LCC) are based on thyristor converters. They are characterized by a single direction of current flow, and a voltage polarity reversal possibility. Significant voltage and current harmonics exist up to frequencies of about 3 kHz to 4 kHz. Voltage source converters (VSC) are based on transistor converters. They are characterized by a bi-directional current flow and a single voltage polarity. Voltage and current harmonics exist up to frequencies of about 20 kHz. The position of the DCVTs on the DC system is illustrated in Figure 1501. Figure 1501 – Position of the DCVT’s in the DC scheme Table 1501 gives an overview of the voltage waveshape as well as the main characteristics of the VT. Table 1501 – Voltage on DCVT’s Voltage Characteristics Pure DC application High-accuracy measurement Harmonics measurement Metering, control and protection purpose

Scope: This part of IEC 61869 provides all requirements specific to voltage transformers to be used in DC applications (DCVTs), whatever the technology used. The output signal can be analogue or digital. It is applicable to newly manufactured voltage transformers used for measuring, protection and/or control applications in DC power systems with a rated voltage above 1,5 kV. This document covers passive voltage dividers as well as active voltage transformers, used for measurement, control and protection. The general configuration of a single-pole low-power instrument transformer is described in Figure 601 of IEC 61869-6:2016.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61869-15-2018 PDF

IEC 61869-15-2018 PDF

$163.93 $327.86