IEC 61888-2002 PDF

IEC 61888-2002 PDF

Nuclear Power Plants - Instrumentation Important to Safety - Determination and Maintenance of Trip Setpoints

$72.51 $145.02 -50%
Product Code: IEC 61888
Stock In Stock
Edition: 1.0
Published: 08/2002
Number of Pages: 48
File Size: 1 file, 548 Bytes

Available Options

Product Description

Nuclear Power Plants - Instrumentation Important to Safety - Determination and Maintenance of Trip Setpoints

Introduction: The purpose of this International Standard is to provide descriptions and recommendations on how to determine and maintain calculations for instrument setpoints associated with IEC 61513. This standard addresses known contributing errors in the channel from the process (including the primary element and sensor) through to and including the final setpoint device. This standard applies to the determination of setpoints used for automatic actions. The recommendations may also be used to determine indicator uncertainties for testing or operator decisions. In general, IAEA NS-R-1 and member country government regulations require that, where an important setpoint is specified for a variable on which a safety limit has been placed, the setting is so chosen that automatic protective action will correct the most severe abnormal situation anticipated before a safety limit is exceeded. Inappropriate selection of a setpoint that does not leave a sufficient margin to account for instrument accuracy, the expected environment, and minor calibration variations can result in failure to trip before a safety limit is exceeded. Protective instruments are provided with setpoints where specific actions are either initiated, terminated or prohibited. Setpoints must be maintained within prescribed limits as defined by the operating licenses through periodic checks of the ability of the channel to perform its function. The single most prevalent reason for the drift of a setpoint out of compliance wit

Scope: This standard defines the requirements for assuring that automatic setpoints for nuclear safety system instrumentation (as defined in clause 3), are established and maintained within specified limits in nuclear power plants and nuclear reactor facilities.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61888-2002 PDF

IEC 61888-2002 PDF

$72.51 $145.02