IEC 61947-1-2002 PDF

IEC 61947-1-2002 PDF

Electronic Projection - Measurement and Documentation of Key Performance Criteria - Part 1: Fixed Resolution Projectors

$163.93 $327.86 -50%
Product Code: IEC 61947-1
Stock In Stock
Edition: 1.0
Published: 08/2002
Number of Pages: 40
File Size: 1 file, 388 Bytes

Available Options

Product Description

Electronic Projection - Measurement and Documentation of Key Performance Criteria - Part 1: Fixed Resolution Projectors

Introduction: This standard was developed to ensure a common, meaningful description of key performance parameters for fixed resolution projectors. The measurement methods and test signals correlate closely to typical uses involving computer-generated text and graphics displays. These measurements evaluate the actual viewable image that emanates from fixed resolution projectors. The resulting performance specifications are conservative in nature and allow any display device to be used beyond its rated specifications with degraded performance. The point at which this degraded performance is no longer useful is highly subjective and strongly affected by the environment and the application. This standard is designed to specify a means of measuring and quantifying the performance of fixed resolution projectors and is not intended to provide design goals for manufacturers of such equipment.

Scope: This part of IEC 61947 specifies requirements for measuring and documenting key performance parameters for electronic projection systems with fixed resolution projectors in which the light source and projection/magnification optics are an integral part of the system (i.e. individual pixel light sources or matrix displays such as liquid crystal, DMD, plasma, or electroluminescent panels). It also applies to LCD panels or other fixed resolution imaging devices themselves that are used with overhead projectors. The provisions of this standard are designed to codify the measurement of the performance of variable resolution projectors and are not intended to provide design goals for manufacturers of such equipment. This standard is intended for fixed resolution projectors that are primarily designed for use with discrete colour (RGB) raster-scanned video, text, and graphics signals generated by computer equipment. NOTE These devices may also accept composite or component television video signals encoded in ITU/R publications, which are not within the scope of this standard. In this standard, all of these signals are referred to as television video (TV video). Projectors and projection systems with multiple variable resolutions, such as cathode-ray tubes and laser projectors, are not fully addressed by this standard, and reference should be made to IEC 61947-2. A discussion of considerations taken into account in the development of this standard appears in Annex C.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61947-1-2002 PDF

IEC 61947-1-2002 PDF

$163.93 $327.86