IEC 61947-2-2001 PDF

IEC 61947-2-2001 PDF

Electronic projection Measurement and documentation of key performance criteria Part 2: Variable resolution projectors

$186.00 $371.99 -50%
Product Code: IEC 61947-2
Stock In Stock
Edition: 1.0
Published: 09/2001
Number of Pages: 52
File Size: 1 file, 1 Byte

Available Options

Product Description

Electronic projection Measurement and documentation of key performance criteria Part 2: Variable resolution projectors

Introduction: This standard was developed to ensure a common, meaningful description of key performance parameters for variable resolution projectors (for example, CRT or laser projectors). The measurement methods and test signals correlate closely to typical uses involving computer-generated text and graphics displays. These measurements evaluate the actual viewable image that emanates from variable resolution projectors. The resulting performance specifications are conservative in nature and allow any display device to be used beyond its rated specifications with degraded performance. The point at which this degraded performance is no longer useful is highly subjective and strongly affected by the environment and the application. This standard is designed to specify a means of measuring and quantifying the performance of variable resolution projectors and is not intended to provide design goals for manufacturers of such equipment.

Scope: This part of IEC 61947 specifies requirements for measuring and documenting key performance parameters for CRT and laser-based projectors and other variable resolution projectors that are capable of multiple variable resolutions and in which the image is raster- scanned. The provisions of this standard are designed to codify the measurement of the performance of variable resolution projectors and are not intended to provide design goals for manufacturers of such equipment. This standard is intended for variable resolution projectors (including projection displays that are capable of multiple variable resolutions) that are designed for use with primarily discrete colour (RGB) raster-scanned video, text, and graphics signals generated by computer equipment. NOTE These devices may also accept composite or component television video signals encoded to NTSC/RS170A, PAL, SECAM, or future HDTV, or ATV standards, which are fully described in their respective documentation and are not within the scope of this part of IEC 61947. In this part of IEC 61947, all of these signals are referred to as television video (TV video) (see IEC 60107-1 [27]). Displays with fixed resolutions (i.e. individual pixel light sources or matrix displays such as liquid crystal, DMD, plasma, or electroluminescent panels), are not fully addressed by this standard, and reference should be made to IEC 61947-1. Factors outside the scope of this standard that may have a bearing on projector performance are listed in annex E. A discussion of considerations informing the development of standard appears in annex C.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61947-2-2001 PDF

IEC 61947-2-2001 PDF

$186.00 $371.99