IEC 62005-3-2001 PDF

IEC 62005-3-2001 PDF

Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 3: Relevant Tests for Evaluating Failure Modes and Failure Mechanisms for Passive Components

$72.51 $145.02 -50%
Product Code: IEC 62005-3
Stock In Stock
Edition: 1.0
Published: 03/2001
Number of Pages: 44
File Size: 1 file, 247 Bytes

Available Options

Product Description

Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 3: Relevant Tests for Evaluating Failure Modes and Failure Mechanisms for Passive Components

Scope: This part of IEC 62005 focuses on failure mechanisms associated with interconnecting devices and passive components. In order to estimate reliability by the acceleration testing described in IEC 62005-2, it is important to determine the dominant failure mechanism and the related test. This part of IEC 62005 introduces a choice of relevant tests from all the IEC 61300 series tests for each known failure mechanism and failure effects related to certain failure modes. (In IEC 62005-5, extension of severity depending on environmental category and performance request will be given.) Choice of relevant tests Figure 1 shows the guidelines for the choice of relevant tests. At the first stage, relevant tests are selected by considering the device type of passive optical components. Then, at the second stage, relevant tests are refined by considering known failure mechanisms for each device. Each set of relevant tests for a particular device and for a particular known failure mechanism is obtained by this procedure. After that, suitable test conditions should be selected. Typical failure points A typical passive optical component consists of different parts (the optical element, the package, the pigtail, joints, etc.) as shown in Figure 2. Each passive component exhibits failures that can be referred to these parts and that can be common for a large class of devices: failure mode, failure mechanisms, failure effects; a set of relevant tests is shown in Table 1. Table 2 is more specific for each device type. Failure modes and known failure mechanisms For any component under consideration, a potential failure mode and effect analysis (PFMEA) should be carried out. Table 2 shows selected relevant tests by the procedure of Figure 1 for known failure mechanism or failure effects for each type of commercially available and testable devices. It must be emphasized that the list of known failure mechanisms and failure effects is not exhaustive. If new technology and new passive components become commercially available, they should be added to Table 2. Relevant tests are listed with the failure effect and the dominant known failure mechanism. As other relevant tests or methods of f

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62005-3-2001 PDF

IEC 62005-3-2001 PDF

$72.51 $145.02