IEC 62053-11-2016 PDF

IEC 62053-11-2016 PDF

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

$97.73 $195.46 -50%
Product Code: IEC 62053-11
Stock In Stock
Edition: 1.1
Published: 11/2016
Number of Pages: 80
File Size: 0 files

Available Options

Product Description

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

Introduction: This part of IEC 62053 is to be used with the following relevant parts of the IEC 62052, IEC 62053 and IEC 62059 series, Electricity metering equipment: IEC 62052-11:2003, Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment Amendment 1 (2016) IEC 62052-31:2015, Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 31: Product safety requirements and tests IEC 62053-21:2003, Electricity metering equipment (a.c.) – Particular requirements – Part 21: Static meters for active energy (classes 1 and 2) Replaces particular requirements of IEC 61036: 2000 (2nd edition) IEC 62053-22:2003, Electricity metering equipment (a.c.) – Particular requirements – Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) Replaces particular requirements of IEC 60687: 1992 (2nd edition) IEC 62053-23:2002, Electricity metering equipment (a.c.) – Particular requirements – Part 23: Static meters for reactive energy (classes 2 and 3) Replaces particular requirements of IEC 61268: 1995 (1st edition) IEC 62053-31:1998, Electricity metering equipment (a.c.) – Particular requirements – Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) IEC 62053-61:1998, Electricity metering equipment (a.c.) – Particular requirements – Part 61: Power consumption and voltage requirements IEC 62059-11:2002, Electricity metering equipment (a.c.) – Dependability – Part 11: Ge

Scope: This part of IEC 62053 applies only to newly manufactured electromechanical watt-hour meters of accuracy classes 0,5, 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It applies only to electromechanical watt-hour meters for indoor and outdoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements also apply. It does not apply to: watt-hour meters where the voltage across the connection terminals exceeds 600 V (line- to-line voltage for meters for polyphase systems); portable meters; data interfaces to the register of the meter. The safety aspect is covered by IEC 62052-31:2015. Regarding acceptance tests, a basic guideline is given in IEC 60514 see IEC 62058-11:2008 and IEC 62058-21:2008. The dependability aspect is covered by the documents of the IEC 62059 series.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62053-11-2016 PDF

IEC 62053-11-2016 PDF

$97.73 $195.46