IEC 62054-21-2017 PDF

IEC 62054-21-2017 PDF

Electricity metering (AC)-Tariff and load control-Part 21: Particular requirements for time switches

$97.73 $195.46 -50%
Product Code: IEC 62054-21
Stock In Stock
Edition: 1.1
Published: 01/2017
Number of Pages: 74
File Size: 0 files

Available Options

Product Description

Electricity metering (AC) – Tariff and load control – Part 21: Particular requirements for time switches

Introduction: This standard distinguishes between protective class I and protective class II equipment The test levels are regarded as minimum values to guarantee the proper functioning of the equipment under normal working conditions. For special application, other test levels might be necessary and should be agreed on between the user and the manufacturer. For information, the relevant parts of IEC 62052, IEC 62054 and IEC 62059 are listed below. IEC 62052-21:2004, Electricity metering equipment (a.c.) – General requirements, tests and test conditions − Part 21: Tariff and load control equipment Amendment 1 (2016) (Replaces the general requirements of IEC 61037 and IEC 61038.) IEC 62052-31:2015, Electricity metering equipment (AC) – General requirements, tests and test conditions –Part 31: Product safety requirements and tests IEC 62054-11 Electricity metering (a.c.) − Tariff and load control − Part 11: Particular requirements for electronic ripple control receivers (Replaces the particular requirements of IEC 61037.) IEC 62054-21 Electricity metering (a.c.) − Tariff and load control − Part 21: Particular requirements for time switches (Replaces the particular requirements of IEC 61038.) IEC 62059-11 Electricity metering equipment − Dependability − Part 11: General concepts IEC 62059-21 Electricity metering equipment – Dependability − Part 21: Collection of meter dependability data from the field IEC 62059-41 Electricity metering equipment − Dependability − Part 41: Reliability predictio

Scope: This part of IEC 62054 specifies particular requirements for the type test of newly manufactured indoor time switches with operation reserve that are used to control electrical loads, multi-tariff registers and maximum demand devices of electricity metering equipment. The time switch keeps the real time, it may keep the date, it may be capable of handling leap years, it may support daylight saving, i.e. it modifies the deviation of local time to GMT according to the relevant regulations. The time switch may have a synchronization capability. The time switch also holds a schedule of switching actions, which may be specified in terms of time, day of the week, date within a month or a year. The time switch controls the output elements depending on the time and the schedule of switching actions stored. This standard gives no requirements for constructional details internal to the time switch. In the case where time switch functionality is integrated into multifunction electricity metering equipment, the relevant parts of this standard apply. This standard covers time switches with analogue mechanical dials or electronic digital displays that are synchronous; or crystal-controlled. This standard does not cover the acceptance tests and the conformity tests. Nevertheless, an example of what could be an acceptance test is given in Annex A . The dependability aspect is covered by the documents of the IEC 62059 series. The safety aspect is covered by IEC 62052-31:2015. When using this standard in conjunction with IEC 62052-21, the requirements of this standard take precedence over those of IEC 62052-21 with regard to any item already covered in it.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62054-21-2017 PDF

IEC 62054-21-2017 PDF

$97.73 $195.46