Electricity metering equipment – Dependability – Part 31-1: Accelerated reliability testing – Elevated temperature and humidity
Introduction: Electricity metering equipment are products designed for high reliability and long life under normal operating conditions, operating continuously without supervision. To manage metering assets effectively, it is important to have tools for predicting and estimating life characteristics of various types. IEC 62059-41 provides methods for predicting the failure rate – assumed to be constant – of metering equipment based on the parts stress method. IEC 62059-31-1 provides a method for estimating life characteristics using temperature and humidity accelerated testing. It is practically impossible to obtain data about life characteristics by testing under normal operating conditions. Therefore, accelerated reliability test methods have to be used. During accelerated reliability testing, samples taken from a defined population are operated beyond their normal operating conditions, applying stresses to shorten the time to failure, but without introducing new failure mechanisms. The estimation is performed by recording and analysing failures during such accelerated testing, establishing the failure distribution under the test conditions and, using life stress models, extrapolating failure distribution under accelerated conditions of use to normal conditions of use. The method provides quantitative results with their confidence limits and may be used to compare life characteristics of products coming from different suppliers or different batches from the same supplier.
Scope: This part of IEC 62059 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. Acceleration can be achieved in a number of different ways. In this particular standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method also takes into account the effect of voltage and current variation. Of course, failures not (or not sufficiently) accelerated by temperature and humidity will not be detected by the application of the test method specified in this standard. Other factors, like temperature variation, vibration, dust, voltage dips and short interruptions, static discharges, fast transient burst, surges, etc. – although they may affect the life characteristics of the meter – are not taken into account in this standard; they may be addressed in future parts of the IEC 62059 series. This standard is applicable to all types of metering equipment for energy measurement, tariff- and load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- Introduction
- Introduction
- Introduction
- 10 Classification and root cause of failures
- 11 Presentation of the results
- 11.1 Information to be given
- 11.2 Example
- 12 Special cases
- 12.1 Cases of simplification
- 12.1.1 Minor evolution of product design