Safety of machinery - Functional safety of safety-related control systems
Introduction: As a result of automation, demand for increased production and reduced operator physical effort, Safety-related Control Systems (referred to as SCS) of machines play an increasing role in the achievement of overall machine safety. Furthermore, the SCS themselves increasingly employ complex electronic technology. IEC 62061 specifies requirements for the design and implementation of safety-related control systems of machinery. This document is machine sector specific within the framework of IEC 61508. NOTE While IEC 62061 and ISO 13849-1 are using different methodologies for the design of safety related control systems, they intend to achieve the same risk reduction. This International Standard is intended for use by machinery designers, control system manufacturers and integrators, and others involved in the specification, design and validation of an SCS. It sets out an approach and provides requirements to achieve the necessary performance and facilitates the specification of the safety functions intended to achieve the risk reduction. This document provides a machine sector specific framework for functional safety of an SCS of machines. It only covers those aspects of the safety lifecycle that are related to safety requirements allocation through to safety validation. Requirements are provided for information for safe use of SCS of machines that can also be relevant to later phases of the lifecycle of an SCS. There are many situations on machines where SCS are employed as pa
Scope: This International Standard specifies requirements and makes recommendations for the design, integration and validation of safety-related control systems (SCS) for machines. It is applicable to control systems used, either singly or in combination, to carry out safety functions on machines that are not portable by hand while working, including a group of machines working together in a co-ordinated manner. This document is a machinery sector specific standard within the framework of IEC 61508 (all parts). The design of complex programmable electronic subsystems or subsystem elements is not within the scope of this document. This is in the scope of IEC 61508 or standards linked to it; see Figure 1. NOTE 1 Elements such as systems on chip or microcontroller boards are considered complex programmable electronic subsystems. The main body of this sector standard specifies general requirements for the design, and verification of a safety-related control system intended to be used in high/continuous demand mode. This document: is concerned only with functional safety requirements intended to reduce the risk of hazardous situations; is restricted to risks arising directly from the hazards of the machine itself or from a group of machines working together in a co-ordinated manner; NOTE 2 Requirements to mitigate risks arising from other hazards are provided in relevant sector standards. For example, where a machine(s) is part of a process activity, additional information is available in IEC 61511. This document does not cover electrical hazards arising from the electrical control equipment itself (e.g. electric shock – see IEC 60204-1); other safety requirements necessary at the machine level such as safeguarding; specific measures for security aspects – see IEC TR TS 63074. This document is not intended to limit or inhibit technological advancement. Figure 1 illustrates the scope of this document. IEC 62061:2021+AMD1:2024+AMD2:2026 CSV © IEC 2026 REDLINE VERSION Figure 1 – Scope of this document
Contents:
- FOREWORD
- INTRODUCTION
- Scope