IEC 62137-1-5-2009 PDF

IEC 62137-1-5-2009 PDF

Surface mounting technology-Environmental and endurance test methods for surface mount solder joints-Part 1-5: Mechanical shear fatigue test

$100.88 $201.76 -50%
Product Code: IEC 62137-1-5
Stock In Stock
Edition: 1.0
Published: 02/2009
Number of Pages: 46
File Size: 1 file, 1 Byte

Available Options

Product Description

Surface mounting technology – Environmental and endurance test methods for surface mount solder joints – Part 1-5: Mechanical shear fatigue test

Introduction: The mechanical properties of lead-free solder joints between leads and lands on a printed wiring board are not the same with tin-lead-containing solder joints, due to their solder compositions. Thus, it becomes important to test the mechanical properties of solder joints of different alloys.

Scope: The test method described in this part of IEC 62137 applies to area array packages, such as BGA. This test method is designed to evaluate the fatigue life of the solder joints between component leads and lands on a substrate as shown in Figure 1. A temperature cyclic approach is generally used to evaluate the reliability of solder joints. Another method is to mechanically cycle the solder joints to shorten the testing time rather than to produce the strains by changing temperatures. The methodology is the imposition of shear deformation on the solder joints by mechanical displacement instead of relative displacement generated by CTE (coefficient of thermal expansion) mismatch, as shown in Figure 2. In place of the temperature cycle test, the mechanical shear fatigue predicts the reliability of the solder joints under repeated temperature change conditions by mechanically cycling the solder joints. In this test method, the evaluation requires first to mount the surface mount component on the substrate by reflow soldering, then cyclic mechanical shear deformation is applied to the solder joints until fracture of the solder joints occurs. The properties of the solder joints (for example solder alloy, substrate, mounted device or design, etc.) are evaluated to assist in improving the strength of the solder joints. NOTE This test, however, does not measure the strength of the electronic components. The test method to evaluate the robustness of the joint to a board is described in IEC 60068-2-21. Component Enlarge Evaluation area Plated layers Substrate land Intermetallic compound layers Solder Substrate Component land Substrate IEC 232/09 Figure 1 – Image drawing on evaluation area of joint strength 62137-1-5 © IEC:2009 – 7 – Solder Thermomechanical fatigue Package Solder Mechanical fatigue Package Mechanical loading Mechanical loading Δd/2 Δd/2 L + Δd Δd = L × (αsubstrate – αpackage) × ΔT Δd/2 Δd/2 L + Δd IEC 233/09 IEC 234/09 Key Δd Relative displacement ΔT Temperature range Coefficient of thermal expansion Figure 2 – Schematic illustrations of thermomechanical and mechanical fatigue for solder joints

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62137-1-5-2009 PDF

IEC 62137-1-5-2009 PDF

$100.88 $201.76