IEC 62149-9-2014 PDF

IEC 62149-9-2014 PDF

Fibre optic active components and devices-Performance standards-Part 9: Seeded reflective semiconductor optical amplifier transceivers

$72.51 $145.02 -50%
Product Code: IEC 62149-9
Stock In Stock
Edition: 1.0
Published: 04/2014
Number of Pages: 40
File Size: 1 file, 444 Bytes

Available Options

Product Description

Fibre optic active components and devices – Performance standards – Part 9: Seeded reflective semiconductor optical amplifier transceivers

Introduction: Fibre optic laser devices are used to convert electrical signals into optical signals. This part of IEC 62149 covers the performance specification for seeded reflective semiconductor optical amplifier (RSOA) transceivers in fibre optic telecommunication and optical data transmission applications. The optical performance criteria are generally well specified for a number of internationally agreed applications areas such as ITU-T Recommendation G.698.3. This standard aims to provide optical interface specifications toward the realization of transversely compatible seeded dense wavelength division multiplexing (DWDM) systems. In seeded DWDM systems, seed light sources are used to generate broadband seed lights in C-band or L-band. After passing through DWDM DeMUXs in the link, the broadband seed lights are spectrum sliced according to the transmission characteristics of DWDM DeMUXs. To simplify link implementation, cyclic arrayed waveguide gratings (AWGs) are used as DWDM MUX/DeMUXs. A characteristic of the cyclic AWG is the periodicity of the frequencies routed from the common port to a given output port. This periodicity is called the free spectral range (FSR). The FSR is commonly specified for a centre channel of the AWG. The connection between the DWDM MUX/DeMUX and RSOA transceiver is bidirectional. Each spectrum sliced seed light is injected to a RSOA based transceiver. Consequently, an output signal wavelength of the RSOA transceiver can be determined by a wavelength of a

Scope: This part of IEC 62149 covers the performance specification for seeded reflective semiconductor optical amplifier (RSOA) transceivers used for the fibre optic telecommunication and optical data transmission applications. The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a “once-off” basis to prove any product’s ability to satisfy the performance standard’s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but should then be controlled by a quality assurance/quality conformance program.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62149-9-2014 PDF

IEC 62149-9-2014 PDF

$72.51 $145.02