Empty enclosures for low-voltage switchgear and controlgear assemblies – General requirements (Commented Version)
Introduction: The purpose of this document is to harmonize as far as practicable all rules and requirements of a general nature applicable to empty enclosures for low-voltage switchgear and controlgear assemblies, in order to obtain uniformity of requirements and verification for empty enclosures and to avoid the need for verification in other standards.
Scope: This document applies to empty enclosures, as provided by the enclosure manufacturer, prior to the incorporation of switchgear and controlgear components by the user, as supplied by the enclosure the assembly manufacturer. 1 This document specifies general definitions, classifications, characteristics and test requirements of enclosures to be used as part of switchgear and controlgear assemblies (e.g. in accordance with the product standard in the IEC 61439 series), the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC, and suitable for general use for either indoor or outdoor applications. NOTE 1 Additional requirements may could apply for specific applications. NOTE 2 The United States of America (USA) uses enclosure “Type” designations according to NEMA 250. The NEMA Enclosure Type designations specify additional environmental requirements for conditions such as corrosion, rust, icing, oil, and coolants. For this reason, the IEC Enclosure Classification Designations IP are used with an enclosure Type designation number appropriate for these markets. 2 NOTE 2 Empty enclosures according to this document are suitable for mounting of electrical components. This document does not apply to enclosures which are covered by other specific products standards (e.g. IEC 60670 series IEC 60670-24). Compliance with the safety requirements of the applicable product standard for the final product produced using an empty enclosure is the responsibility of the assembly manufacturer. 3 NOTE 3 This document may could serve as a basis for other technical committees.
Contents:
- FOREWORD
- INTRODUCTION
- Scope