IEC 62236-1 (REDLINE + STANDARD)-2018 PDF

IEC 62236-1 (REDLINE + STANDARD)-2018 PDF

Railway applications-Electromagnetic compatibility-Part 1: General

$225.09 $450.18 -50%
Product Code: IEC 62236-1 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 02/2018
Number of Pages: 50
File Size: 1 file, 1.2 MB

Available Options

Product Description

Railway applications – Electromagnetic compatibility – Part 1: General

Introduction: The railway system EMC set series of product-specific International Standards consists of five parts described at the end of this introduction. The set series of standards provides both a framework for managing the EMC for railways systems and also specifies the limits for the electromagnetic (EM) emission of the railway system as a whole to the outside world and for the EM emission and immunity for equipment operating within the railway system. The latter must is intended to be compatible with the emission limits set for the railway system as a whole and also provides for establishing confidence in equipment being fit for purpose in the railway environment. There are different stationary emission limits set for trams/trolleybuses and for metro/mainline railways systems. The frequency covered by the standards is in the range from DC to 400 GHz. No measurements need to be performed at frequencies where no requirement is specified. The limits for EMC phenomena are set so that the railway system as a whole achieves electromagnetic compatibility with the outside world, and between the various parts of the railway system. Throughout the set series of standards, the immunity levels are chosen to ensure a reasonable level of EMC with other apparatus within the local railway environment and with emissions which enter the railway system from the outside world. Limits are also placed on EM emission by railways systems into the outside world. The compatibility between railway system emi

Scope: 1.1 This Part 1 of IEC 62236 outlines the structure and the content of the whole series. It specifies the performance criteria applicable to the whole standards series. Clause 5 provides information about the management of EMC. Annex A describes the characteristics of the railway system which affect electromagnetic compatibility (EMC) behaviour. Phenomena excluded from the series are nuclear EM pulse, abnormal operating conditions (e.g. fault conditions) and the induction effects of direct lightning strike. Emission limits at the railway system boundary do not apply to intentional transmitters within the railway system boundaries. Safety considerations are not covered by this series of standards. The biological effects of non-ionising radiation as well as apparatus for medical assistance, such as pacemakers, are not considered in this series. 1.2 This part of IEC 62236 is supplemented by the following specific standards: IEC 62236-2 Railway applications – Electromagnetic compatibility – Part 2: Emission of the whole railway system to the outside world IEC 62236-3-1 Railway applications – Electromagnetic compatibility – Part 3-1: Rolling stock – Train and complete vehicle IEC 62236-3-2 Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock – Apparatus IEC 62236-4 Railway applications – Electromagnetic compatibility – Part 4: Emission and immunity of the signalling and telecommunications apparatus IEC 62236-5 Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62236-1 (REDLINE + STANDARD)-2018 PDF

IEC 62236-1 (REDLINE + STANDARD)-2018 PDF

$225.09 $450.18