IEC 62246-1-1-2018 PDF

IEC 62246-1-1-2018 PDF

Reed switches-Part 1-1: Generic specification-Blank detail specification

$239.59 $479.18 -50%
Product Code: IEC 62246-1-1
Stock In Stock
Edition: 2.0
Published: 02/2018
Number of Pages: 128
File Size: 1 file, 2 Bytes

Available Options

Product Description

Reed switches – Part 1-1: Generic specification – Blank detail specification

Introduction: Reed switches which are in mass production and which are widely used, in practice could be classified by the following characteristics: a) Size: Normal or standard reed switches with a tube more than 50 mm in length and more than 5 mm in diameter; Sub-miniature reed switches with a tube more than 20 mm and up to 50 mm in length and up to 5 mm in diameter; Miniature reed switches with a tube more than 10 mm and up to 20 mm in length and more than 2 mm and up to 5 mm in diameter; Micro-miniature reed switches with a tube up to 10 mm in length and up to 2 mm in diameter. b) Type of switching of electric circuit: Closing or normally open – A type or NO; Opening or normally closed – B type or NC; Changeover – C type or CO. c) Withstand voltage level: Low-voltage (up to 1 000 V); High-voltage (more than 1 000 V). d) Switches power: Low-power (up to 60 W or 60 VA); Power (100 W to 1 000 W or 100 VA to 1 000 VA); High-power (more than 1 000 W or 1 000 VA). e) Types of electric contacts: The tube is filled with dry air, gas mixture, vacuumized, or high pressurized. Based on the general provisions of IEC 62246-1:2015, this document selects and specifies blank detail and detail specifications including safety contact ratings and test procedures for reed switches where enhanced requirements for the verification of quality assessment specification apply. This document describes sampling and test schedules for qualification approval procedures, quality conformance inspection, formation of

Scope: This part of IEC 62246 which is a blank detail specification defines requirements and tests for reed switches for use in general and industrial applications. This document is intended to be used in conjunction with IEC 62246-1:2015 and specific products standards applying as switching elements. This document selects from IEC 62246-1:2015 and from other sources the appropriate test procedures to be used in detail specifications derived from this specification. Reed switch types are specified depending on characteristic values including functional ratings for safety and tests. NOTE Mercury wetted reed switches are not covered by this document due to their possible environmental impact.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62246-1-1-2018 PDF

IEC 62246-1-1-2018 PDF

$239.59 $479.18