High-voltage switchgear and controlgear – Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV
Introduction: Earthing switches forming an integral part of a circuit-switcher are covered by IEC 62271-102 [1]1. Installation in enclosure, if any, is covered either by IEC 62271-200 [2] or by IEC 62271-201 [3]. ______________ 1 Numbers in square brackets refer to the Bibliography.
Scope: This part of IEC 62271 applies to three-pole-operated fused circuit-switchers designed with rated voltages above 1 kV up to and including 52 kV for use on three-phase alternating current systems of either 50 Hz or 60 Hz. They can be designed either as stand-alone devices, or be embedded in a switchgear and controlgear assembly. They are intended to be used for circuits or applications requiring only a normal mechanical and electrical endurance capability. Such applications cover protection of HV/LV transformers for instance, but exclude distribution lines or cables, as well as motor circuits and capacitor bank circuits. Short-circuit conditions with low currents, up to the fused circuit-switcher rated take-over current, are dealt with by supplementary devices (strikers, relays, etc.), properly arranged, tripping the circuit-switcher. Current-limiting fuses are incorporated in order to ensure that the short-circuit breaking capacity of the device is above that of the circuit-switcher alone. NOTE 1 In this document, the term "fuse" is used to designate either the fuse or the fuse-link where the general meaning of the text does not result in ambiguity. NOTE 2 Other circuit-switchers exist; see reference [4]. Devices that require a dependent manual operation are not covered by this document.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 3.101 Fuses
- 5.101 Rated short-circuit breaking current (Isc)
- 5.102 Rated short-circuit making current (Ima)
- 5.103 Rated take-over current (Ito)