Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) - Part 2: Systems approach to safety
Introduction: IEC 62278:2002 was aimed at introducing the application of a systematic RAMS management process in the railway sector. Through the application of IEC 62278:2002 and the experiences gained over the last years, the need for revision and restructuring became apparent with a need to deliver a systematic and coherent approach to RAMS applicable to all the railway application fields including signalling, rolling stock and fixed installations. This document provides railway duty holders and the railway suppliers with a process which will enable the implementation of a consistent approach to the management of reliability, availability, maintainability and safety, denoted by the acronym RAMS. Processes for the specification and demonstration of RAMS requirements are cornerstones of this document. This document promotes a common understanding and approach to the management of RAMS. The IEC 62278 series is derived from the European Standard series EN 50126:2017, consisting of EN 50126-1:2017 and EN 50126-2:2017. With regard to safety, IEC 62278-1 provides a safety management process which is supported by guidance and methods described in this document. IEC 62278-1 and IEC 62278-2 are independent from the technology used. As far as safety is concerned, IEC 62278 takes the perspective of safety with a functional approach. The application of this document can be adapted to the specific requirements for the system under consideration. This document can be applied systematically by the railw
Scope: This document considers the safety-related generic aspects of the RAMS life cycle and defines methods and tools which are independent of the actual technology of the systems and subsystems. This document provides: a) methods for the understanding of the systems approach to safety which is a key concept of IEC 62278; b) methods to derive the safety requirements and their safety integrity requirements for the system and to apportion them to the subsystems; c) methods to derive the safety integrity levels (SIL) for the safety-related electronic functions; d) guidance and methods for the following areas: 1) safety process; 2) safety demonstration and acceptance; 3) organization and independence of roles; 4) risk assessment; 5) specification of safety requirements; 6) apportionment of functional safety requirements; 7) design and implementation; e) the user of this document with the methods to assure safety with respect to the system under consideration and its interactions; f) guidance about the definition of the system under consideration, including identification of the interfaces and the interactions of this system with its subsystems or other systems, in order to conduct the risk analysis. This document does not specify: g) RAMS targets, quantities, requirements or solutions for specific railway applications; h) rules or processes pertaining to the certification of railway products against the requirements of this document; i) an approval process by the safety authority. This document is applicable: j) to the specification and demonstration of RAMS for all railway applications and at all levels of such an application, as appropriate, from complete railway systems to major systems and to individual and combined subsystems and components within these major systems, including those containing software; in particular: 1) to new systems; 2) to new systems integrated into existing systems already accepted, but only to the extent and insofar as the new system with the new functionality is being integrated. It is otherwise not applicable to any unmodified aspects of the existing system; 3) as far as reasonably practicable, to modifications and extensions of existing sys
Contents:
- FOREWORD
- INTRODUCTION
- Scope