IEC 62282-3-300-2012 PDF

IEC 62282-3-300-2012 PDF

Fuel cell technologies-Part 3-300: Stationary fuel cell power systems-Installation

$72.51 $145.02 -50%
Product Code: IEC 62282-3-300
Stock In Stock
Edition: 1.0
Published: 06/2012
Number of Pages: 42
File Size: 1 file, 319 Bytes

Available Options

Product Description

Fuel cell technologies – Part 3-300: Stationary fuel cell power systems – Installation

Introduction: This International Standard covers the installation of stationary fuel cell power systems that are built in compliance with IEC 62282-3-100. The requirements of this standard are not intended to constrain innovation. Installations employing materials and/or methods differing from those detailed in this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard.

Scope: This part of IEC 62282 provides minimum safety requirements for the installation of indoor and outdoor stationary fuel cell power systems in compliance with IEC 62282-3-100 and applies to the installation of the following systems: intended for electrical connection to mains directly or with a readily accessible, manually operable switch or circuit-breaker; intended for a stand-alone power distribution system; intended to provide AC or DC power; with or without the ability to recover useful heat. This standard is limited to those conditions that may be created by the installation process that can lead to personnel hazards or damage to equipment or property external to the fuel cell power system. This standard does not cover the safety requirements of the stationary fuel cell power system which are covered by IEC 62282-3-100. Additionally, this standard does not cover: fuel supply and/or fuel storage systems; auxiliary media supply and disposal; switches or circuit-breakers; portable fuel cell power systems; propulsion fuel cell power systems; APU (auxiliary power units) applications. A typical stationary fuel cell power system installation is represented in Figure 1. – 8 – 62282-3-300  IEC:2012 System boundary Power inputs Recovered heat Waste heat Fuel Useable power electrical Oxidant Discharge water Water Inert gas Exhaust gases ventilation Ventilation EMD vibration, wind, rain, temperature etc. Internal power needs Power conditioning system Fuel cell module Fuel processing system Automatic control system Ventilation system Water treatment system Thermal management system EMI noise vibration Oxidant processing system Onboard energy storage Electrical Thermal Mechanical IEC 105/12 Key EMD electromagnetic disturbance EMI electromagnetic interference Figure 1 – Fuel cell power system Fuel cell power systems are divided into two categories: small systems; large systems. Terms and definitions are given in Clause 3.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 10 Approval tests
  • 10.1 Gas leakage

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62282-3-300-2012 PDF

IEC 62282-3-300-2012 PDF

$72.51 $145.02