Fuel cell technologies – Part 8-201: Energy storage systems using fuel cell modules in reverse mode – Test procedures for the performance of power-to-power systems
Introduction: This part of IEC 62282 specifies performance evaluation methods for electric energy storage systems using hydrogen that employ electrochemical reactions both for water/ and steam electrolysis and electric power generation. NOTE Heat generation can be a secondary purpose. This document is intended for power-to-power systems which typically employ a set of electrolyser and fuel cell, or a reversible cell for devices of electric charge and discharge. A typical target application of the electric energy storage systems using hydrogen is in the class of energy intensive electric energy storage. The systems are recognized as critically useful for the relatively long-term power storage operation, such as efficient storage and supply of the renewable power derived electric energy and grid stabilization. The IEC 62282-8 series aims to develop performance test methods for power storage and buffering systems based on electrochemical modules (combining electrolysis and fuel cells, in particular reversible cells), taking into consideration both options of re-electrification and substance (and heat) production for sustainable integration of renewable energy sources. Under the general title Energy storage systems using fuel cell modules in reverse mode, the IEC 62282-8 series consists of the following parts: IEC 62282-8-101: Test procedures for the performance of solid oxide single cells and stacks, including reversible operation IEC 62282-8-102: Test procedures for the performance of single
Scope: This part of IEC 62282 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. It is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor). The conceptual configurations of the electric energy storage systems using hydrogen are shown in Figure 1 and Figure 2. Figure 1 shows the system independently equipped with an electrolyser module and a fuel cell module. Figure 2 shows the system equipped with a reversible cell module. There are an electrolyser, a hydrogen storage and a fuel cell, or a reversible cell, a hydrogen storage and an overall management system (which may include a pressure management) as indispensable components. There may be a battery, an oxygen storage, a heat management system (which may include a heat storage) and a water management system (which may include a water storage) as optional components. The performance measurement is executed in the area surrounded by the outside thick solid line square (system boundary). Indispensable components are an electrolyser module and a fuel cell module, or a reversible cell module, an overall management system (which includes a data interface and can include a pressure management), a thermal management system (which can include a thermal storage), a water management system (which can include a water storage) and a purge gas supply (inert gas, practically neither oxidizing nor reducing). NOTE 1 Indispensable components are indicated by bold lines in Figure 1 and Figure 2. The system can be equipped with either a hydrogen storage or a connection to an external hydrogen supply infrastructure or a combination of both. There can be a battery and an oxygen storage, as optional components. The electrolyser module can comprise one or more electrolysers whether or not of the same type. Depending on the operating conditions and considering the operation history, the overall management system can command the concurrent operation of the electrolysers. The fuel cell module can comprise one
Contents:
- FOREWORD
- INTRODUCTION
- Scope