IEC 62320-1-2015 PDF

IEC 62320-1-2015 PDF

Maritime navigation and radiocommunication equipment and systems-Automatic identification system (AIS)-Part 1: AIS Base Stations-Minimum operational and performance requirements, methods of testing and required test results

$271.12 $542.23 -50%
Product Code: IEC 62320-1
Stock In Stock
Edition: 2.0
Published: 01/2015
Number of Pages: 132
File Size: 1 file, 1 Byte

Available Options

Product Description

Maritime navigation and radiocommunication equipment and systems – Automatic identification system (AIS) – Part 1: AIS Base Stations – Minimum operational and performance requirements, methods of testing and required test results

Introduction: Chapter V of the International Convention for the Safety of Life at Sea 1974 (SOLAS) requires mandatory carriage of Automatic Identification System (AIS) equipment on all vessels constructed on or after 01 July 2002. Carriage for other types and sizes of SOLAS Convention vessels was required to be completed not later than 31 December 2004. SOLAS Chapter V, Regulation 19, states that AIS shall: a) provide automatically to appropriate equipped shore stations, other ships and aircraft information, including ship's identity, type, position, course, speed, navigational status and other safety-related information; b) receive automatically such information from similarly fitted ships; c) monitor and track ships; and d) exchange data with shore-based facilities. In addition, the IMO performance standards for AIS state that: The AIS should improve the safety of navigation by assisting in the efficient navigation of ships, protection of the environment, and operation of Vessel Traffic Services (VTS), by satisfying the following functional requirements: 1) in a ship-to-ship mode for collision avoidance; 2) as a means for littoral States to obtain information about a ship and its cargo; and 3) as a VTS tool, i.e. ship-to-shore (traffic management). The AIS should be capable of providing to ships and to competent authorities, information from the ship, automatically and with the required accuracy and frequency, to facilitate accurate tracking. Transmission of the data should be with the m

Scope: This part of IEC 62320 specifies the minimum operational and performance requirements, methods of testing and required test results for AIS Base Stations, compatible with the performance standards adopted by IMO Resolution MSC.74 (69), Annex 3, Universal AIS. It incorporates the technical characteristics of non-shipborne, fixed station AIS equipment, included in recommendation ITU-R M.1371 and IALA Recommendation A-124. Where applicable, it also takes into account the ITU Radio Regulations. This standard takes into account other associated IEC international standards and existing national standards, as applicable. This standard is applicable for AIS Base Stations. It does not include specifications for the display of AIS data on shore.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62320-1-2015 PDF

IEC 62320-1-2015 PDF

$271.12 $542.23