IEC 62321-9-2021 PDF

IEC 62321-9-2021 PDF

Determination of certain substances in electrotechnical products-Part 9: Hexabromocyclododecane in polymers by gas chromatography-mass spectrometry (GC-MS)

$163.93 $327.86 -50%
Product Code: IEC 62321-9
Stock In Stock
Edition: 1.0
Published: 08/2021
Number of Pages: 66
File Size: 1 file, 1 Byte

Available Options

Product Description

Determination of certain substances in electrotechnical products – Part 9: Hexabromocyclododecane in polymers by gas chromatography-mass spectrometry (GC-MS)

Introduction: The widespread use of electrotechnical products has drawn increased attention to their impact on the environment. In many countries this has resulted in the adoption of regulations affecting wastes, substances and energy use of electrotechnical products. The use of certain substances (e.g. lead (Pb), cadmium (Cd) and polybrominated diphenyl ethers (PBDEs) in electrotechnical products is a source of concern in current and proposed regional legislation. The purpose of this document is therefore to provide test methods that will allow the electrotechnical industry to determine the levels of certain substances of concern in electrotechnical products on a consistent global basis. WARNING – Persons using this document should be familiar with normal laboratory practice. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.

Scope: This part of IEC 62321 specifies two techniques for the determination of hexabromocyclododecane (HBCDD) in polymers of electrotechnical products. The gas chromatography-mass spectrometry (GC-MS) test method is described in the normative part of this document. The GC-MS method is suitable for the determination of hexabromocyclododecane (HBCDD). A method using high-pressure liquid chromatography-mass spectrometry (HPLC-MS) is given in informative Annex A. These test methods have been evaluated for use with EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and ABS (acrylonitrile butadiene styrene) within the concentration ranges as specified in Table 1. The use of this method for other types of materials or concentration ranges outside those specified below has not been evaluated. Table 1 – Tested concentration ranges for HBCDD by GC‑MS in various materials Substance or element HBCDD Parameter Unit of measurement mg/kg Medium or material tested EPS/XPS ABS Concentration range tested 6 080 to 11 940 1 000 to 10 000 This document has the status of a horizontal standard in accordance with IEC Guide 108.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62321-9-2021 PDF

IEC 62321-9-2021 PDF

$163.93 $327.86