IEC 62343-5-2-2018 PDF

IEC 62343-5-2-2018 PDF

Dynamic modules-Part 5-2: Test methods-1 x N fixed-grid WSS-Dynamic crosstalk measurement

$100.88 $201.76 -50%
Product Code: IEC 62343-5-2
Stock In Stock
Edition: 1.0
Published: 01/2018
Number of Pages: 46
File Size: 1 file, 841 Bytes

Available Options

Product Description

Dynamic modules – Part 5-2: Test methods – 1 x N fixed-grid WSS – Dynamic crosstalk measurement

Introduction: Dynamic crosstalk is attributed to both channel crosstalk (due to same wavelength and/or other wavelengths) and port isolation. It is predicted to change during port switching operations and is significant performance issue studied and summarized in IEC TR 62343-6-9 for 1 x N (N ≥ 3) wavelength selective switches (WSSs). It was revealed that dynamic crosstalk exists in actual 1 x N (N ≥ 3) WSSs in IEC TR 6234369 and predicted that it would influence transmission properties to some extent when a specific channel passes through the WSS. This document standardizes the measurement method of dynamic crosstalk of 1 x N (N ≥ 3) WSSs. This document is based on OITDA DM 01 from the Optoelectronic Industry and Technology Development Association (OITDA).

Scope: This part of IEC 62343 describes the measurement methods of dynamic crosstalk during port switching for 1 x N fixed-grid wavelength selective switches (WSSs). The objective of this document is to establish a standard test method for different-channel dynamic crosstalk and same-channel dynamic crosstalk that occur when a particular optical channel signal is switched to the specific branching port against a common port in ITU-T 50 GHz and 100 GHz fixed grid 1 x N (N ≥ 3) WSSs.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62343-5-2-2018 PDF

IEC 62343-5-2-2018 PDF

$100.88 $201.76