Baseline specifications of satellite and terrestrial receivers for ISDB (Integrated Services Digital Broadcasting)
Introduction: This International Standard is based on, and is the subset of ARIB1 STD-B21 Version 4.5 which is established with regard to digital broadcasting receivers. It contains baseline specifications of receivers for satellite and terrestrial ISDB systems. It does not contain EPG (Electronic Program Guide), CA (Conditional Access), bi-directional communication function, data decoder function and high speed digital interface connector specification which were covered by the ARIB STD-B21. ___________ 1 The Association of Radio Industries and Businesses establishes ARIB standards for the basic technical requirements such as various radio-equipment specifications for various radio signal utilization systems, with the participation of broadcasting-equipment manufacturers, broadcasting service providers, radio-equipment manufacturers, telecommunication companies, and their users. ARIB standards are private standards established by compiling private and voluntary standards that have been developed to increase convenience for broadcasting-equipment manufacturers, broadcasting service providers, radio-equipment manufacturers, telecommunication companies, and their users, such as by ensuring the appropriate quality of and compatibility between broadcasting and radio facilities. These standards are intended to be used in conjunction with national technical standards established to ensure the efficient use of available frequencies and to avoid radio interference between users. In order to ensure
Scope: This International Standard specifies the basic functions, ratings, and performance of receivers for the Integrated Services Digital Broadcasting (ISDB) system. It applies to: receivers for standard digital television broadcasting, high-definition television broadcasting, and radio broadcasting from satellite broadcasting stations in the frequency band of 11,7 GHz to 12,2 GHz (hereinafter referred to as “BS digital broadcasting”); receivers for standard digital television broadcasting with a bandwidth of 34,5 MHz from satellite broadcasting stations in the frequency band of 12,2 GHz to 12,75 GHz (hereinafter referred to as “broadband CS digital broadcasting”); and receivers for the standard digital television broadcasting and high-definition television broadcasting from terrestrial broadcasting stations (hereinafter referred to as “digital terrestrial television broadcasting”). With regard to the receiver, it may be designed for receiving only one broadcast service from the above-mentioned digital broadcasting or for receiving multiple broadcast services. Various types of receivers for receiving digital terrestrial television broadcasts may be designed, that is, receivers intended for fixed, for mobile and for portable reception. This standard defines the BS digital-broadcasting receiver, the dual-purpose receiver for BS digital broadcasting and broadband CS digital-broadcasting (hereinafter referred to as a “BS and broadband CS digital broadcasting dual-purpose receiver”), as well as the receiver for digital terrestrial television broadcasting using an outdoor fixed receiving antenna and with a large display. For a small-sized simple receiver, a vehicle-mounted receiver, a portable receiver, and the like, this standard should be applied as far as practical. In this standard, the BS digital-broadcasting receiver and the BS and broadband CS digital-broadcasting dual-purpose receiver are generically described as digital satellite broadcasting receivers. In addition, when it is necessary to distinguish between the BS digital-broadcasting receiver and the BS and broadband CS digital-broadcasting dual-purpose receiver, [BS] is additionally used to specify a BS digita
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 5.5.10 Audio decoding and its output
- 5.5.11 External interfaces
- 5.5.12 Remote controller and channel access
- 6.2.10 Video decoding and its output
- 6.2.11 Audio decoding and its output
- 6.2.12 External interfaces
- 6.2.13 Remote controller and channel access