Nuclear power plants - Instrumentation and control important to safety - Methods for assessing the performance of safety system instrument channels
Introduction: a) Technical background, main issues and organisation of the Standard This International Standard describes test methods for ensuring that safety system instrument channels in nuclear power plants comply with specifications for accuracy, response time and other performance characteristics. This Standard applies to those instruments whose primary sensors measure temperature, pressure, differential pressure, liquid level, flow and neutron flux. The focus of this Standard is on test methods that can be used remotely while the plant is on-line without a need to enter the reactor containment or physically access the instruments. b) Situation of the current Standard in the structure of the SC 45A standard series IEC 62385 is the third level SC 45A document tackling the issue of assessing methods of performance of safety systems instrument channels. For more details on the structure of the SC 45A standard series, see item d) of this introduction. c) Recommendations and limitations regarding the application of this Standard The main interests to benefit from this international Standard are nuclear utilities that use on- line performance testing, suppliers who develop and install such systems, and regulatory authorities seeking documented industry consensus on successful practices. These users will benefit from the awareness of methods and practices considered appropriate by IEC experts and from the cost savings associated with the standardization of methods and practices. d) Descript
Scope: The purpose of this International Standard is to define the requirements for demonstrating acceptable performance of safety system instrument channels through response time testing, calibration verification, and other means. The same requirements may be adopted for demonstrating the acceptable performance of non-safety systems and other instrument channels. This Standard contains the main topics in its body and includes annexes to provide further information. The annexes are for information only and contain a selection of the available methods. The methods described in this Standard are used to check instrument calibration for accuracy and time response. It covers direct methods used to set calibration within required tolerances and indirect methods to indicate a need for a direct calibration. The use of the indirect methods allows for longer periods between the routine direct calibrations.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- Introduction
- Introduction