Radiation protection instrumentation – Passive integrating dosimetry systems for environmental and personal monitoring – Part 1: General characteristics and performance requirements
Introduction: IEC 62387 is published in separate parts according to the following structure: Part 1: General General characteristics and performance requirements Part 2: Thermoluminescence dosimetry systems Specific characteristics of, and performance requirements for, thermoluminescence dosimetry systems Up to now, this part is represented by the second edition of IEC 61066. Parts 3 and following: Other dosimetry systems The further parts (to be published later) contain specific characteristics of, and performance requirements for, other detectors like direct ion storage, optically stimulated luminescence etc. A dosimetry system may consist of the following elements: a) a passive device, referred to here as a detector, which, after the presence of radiation, provides and stores a signal for use in measuring one or more quantities of the incident radiation field; b) a dosemeter, that incorporates some means of identification and contains one or more detectors; c) a reader which is used to readout the stored information (signal) from the detector, in order to determine the radiation dose; d) a computer with appropriate software to control the reader, store the signals transmitted from the reader, calculate, display and store the evaluated dose in the form of an electronic file or paper copy; e) additional equipment and documented procedures (instruction manual) for performing associated processes such as deleting stored dose information, cleaning dosemeters, or those needed to ensure the ef
Contents:
- FOREWORD
- INTRODUCTION
- 10 Software, data and interfaces of the dosimetry system
- 10.1 General
- 10.2 Requirements
- 10.3 Method of test
- 11 Radiation performance requirements and tests (dosimetry system)
- 11.1 General
- 11.2 Coefficient of variation
- 11.3 Non-linearity
- 11.4 Overload characteristics, after-effects and reusability
- 11.5 Radiation energy and angle of incidence for Hp(10) or H*(10) dosemeters
- 11.6 Radiation energy and angle of incidence for Hp(0,07) dosemeters
- 11.7 Radiation incidence from the side of an Hp(10) or Hp(0,07) dosemeter
- 12 Additivity of the indicated value (dosimetry system)
- 12.1 Requirements
- 12.2 Method of test