Nuclear power plants – Instrumentation and control important to safety – Resistance temperature detectors
Introduction: a) Technical background, main issues and organisation of the standard This standard describes the requirements for the design, material selection, procurement, construction, and testing of resistance temperature detectors (RTDs) used in nuclear power plants (NPPs). These RTDs may be used in both the nuclear safety I&C systems and/or in the non-safety-related instrumentation systems. This standard is a revision merger of IEC 62397 and IEC 61224 and was initiated in November 2019. b) Situation of the current standard in the structure of the SC 45A standard series IEC 62397 is not directly referenced by IEC 61513 and is a third-level SC 45A document tackling the issue of RTDs. For more details on the structure of the SC 45A series of standards, see item d) of this introduction. c) Recommendations and limitations regarding the application of this standard There is no particular recommendation or limitation regarding the application of this standard. d) Description of the structure of the IEC SC45A standard series and relationships with other IEC documents and other bodies documents (IAEA, ISO) The IEC SC 45A standard series comprises a hierarchy of four levels. The top-level documents of the IEC SC 45A standard series are IEC 61513 and IEC 63046. IEC 61513 provides general requirements for instrumentation and control (I&C) systems and equipment that are used to perform functions important to safety in nuclear power plants (NPPs). IEC 63046 provides general requirements for electr
Scope: This document describes the requirements for resistance temperature detectors (RTDs) suitable for applications in I&C systems important to safety of nuclear power plants. The requirements of RTDs include design, materials, manufacturing, testing, calibration, procurement, and inspection. RTDs used for safety applications in Nuclear Power Plants can be categorized into direct-immersed and thermowell-mounted RTDs. Furthermore, there are RTDs with specific design which cannot be assigned to the categories mentioned above. However, they are also covered by the requirements stated in this document. This document does not cover the design, material selection, and construction of the thermowell, the guide tube, the extension cable, and the temperature transmitter or resistance bridge which may be associated with the RTD.
Contents:
- FOREWORD
- INTRODUCTION
- Scope