Safety requirements for secondary batteries and battery installations – Part 5: Safe operation of stationary lithium ion batteries
Introduction: The described safety requirements comprise the protective measures to protect from hazards generated by electricity and chemical substances when using secondary batteries. In addition measures are described to maintain the functional safety of batteries and battery installations. For electrical safety (protection against electric shock) under Clause 4, this document refers to IEC 60364-4-41. The pilot function of this document is fully observed by indication of cross- reference numbers of the relevant clauses, but interpretation is given where adoption to direct current (DC) circuits is required. This document comes into force with the date of publication and applies to all new batteries and battery installations. Previous installations are intended to conform to the existing national standards at the time of installation. In the case of the redesign of old installations, this document applies. Lithium ion cells/batteries used in stationary industrial applications are intended to fulfil safety requirements in accordance with IEC 62619.
Scope: This part of IEC 62485 applies to the installation of one or more stationary secondary batteries having a maximum aggregate DC voltage of 1 500 V to any DC part of the power network, and describes the principal measures for protections during normal operation or under expected fault conditions against hazards generated from: electricity, short-circuits, electrolyte, gas emission, fire, explosion. This document provides requirements on safety aspects associated with the installation, use, inspection, and maintenance and disposal of lithium ion batteries used in stationary applications. This document covers stationary batteries for industrial applications that are installed in separate closed buildings or housings as well as stationary batteries that are installed in public buildings, offices and private residences. This document also covers the maintenance and disposal of lithium ion batteries used in stationary applications. Batteries containing lithium metal are not covered by this document. Examples of the main applications are: telecommunications, power station operation, central emergency lighting and alarm systems, uninterruptible power supplies (UPS), stationary engine starting, photovoltaic systems. In general, the safety requirements for secondary batteries and battery installations – General safety information and definitions are specified for lead-acid, nickel-cadmium and nickel-metal hybrid batteries in accordance with IEC 62485-1.
Contents:
- FOREWORD
- INTRODUCTION
- Scope