Electroacoustics – Audio-frequency induction loop systems for assisted hearing – Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
Introduction: A revision of IEC 62489-2 is necessary because, while the standard does not call up any particular set of exposure limits, it has numerous references to the ICNIRP Guide, which has profoundly changed between the 1998 and 2010 editions. This has resulted in a change in the physical quantity on which the basic restrictions are established, from tissue current density to induced electric field, resulting in changes to the reference levels and a considerable simplification of the application of the guidelines. The recommendations of the new Guide have not yet been adopted at the regulatory level in the European Union. However, since the references to the Guide in IEC 62489-2 are purely informative, it does not appear that this revision should be unacceptable in Europe.
Scope: This part of IEC 62489 applies to audio-frequency induction-loop systems for assisted hearing. It may also be applied to such systems used for other purposes, as far as it is applicable. The standard is intended for assessment of human exposure to low-frequency magnetic fields produced by the system, by calculation and by in-situ testing. This standard does not deal with other aspects of safety, for which IEC 60065 applies, or with EMC.
Contents:
- FOREWORD
- INTRODUCTION
- Scope