Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
Introduction: Bandwidth densities in modern data communication systems are driven by interconnect speeds and scalable input/output (I/O) and will continue to increase over the coming years, thereby severely impacting cost and performance in future data communication systems, bringing increased demands in terms of signal integrity and power consumption. The projected increase in capacity, processing power and bandwidth density in future information communication systems will need to be addressed by the migration of embedded optical interconnects into system enclosures. In particular, this would necessitate the deployment of optical circuit board technologies on some or all key system cards, such as the backplane, motherboard and peripheral circuit boards. Many varieties of optical circuit board technology exist today, which differ strongly from each other in terms of their intrinsic waveguide technology. As shown in Figure 1, these varieties include, but are not limited to: a) fibre-optic laminate, b) polymer waveguides and c) planar glass waveguides. Annex A provides a detailed overview of the state of the art of such optical interconnect technologies. a) Fibre-optic laminate b) Polymer waveguides c) Planar glass waveguides Figure 1 – Optical circuit board varieties One important prerequisite to the commercial adoption of optical circuit boards is a reliable test and measurement definition system that is agnostic to the type of waveguide system under test and, therefore, can be applied to
Scope: This part of IEC 62496 specifies a method of defining the conditions for measurements of optical characteristics of optical circuit boards. The method comprises the use of code reference look-up tables to identify different critical aspects of the measurement environment. The values extracted from the tables are used to construct a measurement identification code, which, in itself, captures sufficient information about the measurement conditions, so as to ensure consistency of independently measured results within an acceptable margin. Recommended measurement conditions are specified to minimise further variation in independently measured results.
Contents:
- FOREWORD
- INTRODUCTION
- Scope