Methods for product accelerated testing
Introduction: Many reliability or failure investigation test methods have been developed and most of them are currently in use. These methods are used to either determine product reliability or to identify potential product failure modes, and have been considered effective as demonstrations of reliability: fixed duration, sequential probability ratio, reliability growth tests, tests to failure, etc. Such tests, although very useful, are usually lengthy, especially when the product reliability that has to be demonstrated is high. The reduction in time-to-market periods as well as competitive product cost, increase the need for efficient and effective accelerated testing. Here, the tests are shortened through the application of increased stress levels or by increasing the speed of application of repetitive stresses, thus facilitating a quicker assessment and growth of product reliability through failure mode discovery and mitigation. There are two distinctly different approaches to reliability activities: the first approach verifies, through analysis and testing, that there are no potential failure modes in the product that are likely to be activated during the expected life time of the product under the expected operating conditions and usage profile; the second approach estimates how many failures can be expected after a given time under the expected operating conditions and usage profile. Accelerated testing is a method appropriate for both cases, but used quite differently. The first app
Scope: This document provides guidance on the application of various accelerated test techniques for measurement or improvement of item reliability. Identification of potential failure modes that can be experienced in the use of an item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item reliability, or to achieve necessary reliability and availability improvement, all within a compressed or accelerated period of time. This document addresses accelerated testing of non- repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability can differ from the standard probability of failure occurrence. This document also extends to present accelerated testing or production screening methods that would identify weakness introduced into the item by manufacturing error, which can compromise item reliability. Services and people are however not covered by this document.
Contents:
- FOREWORD
- INTRODUCTION
- Scope