IEC 62549-2011 PDF

IEC 62549-2011 PDF

Articulated systems and flexible systems for cable guiding

$186.00 $371.99 -50%
Product Code: IEC 62549
Stock In Stock
Edition: 1.0
Published: 10/2011
Number of Pages: 86
File Size: 0 files

Available Options

Product Description

Articulated systems and flexible systems for cable guiding

Scope: This technical report describes two methods for the measurement of the sensitivity of single- mode optical fibres to high-power damage at bends: test method 1 – Failure time characterisation as a function of the launch power and bend conditions (bend angle and bend diameter); test method 2 – Equilibrium temperature measurement. Results from the two methods can only be compared qualitatively. The results in this report are predominantly on un-cabled and un-buffered fibres. Cabled and buffered fibres are expected to respond differently, because the outer layers can affect the ageing process. Note also that test method 2 testing cannot be applied to buffered or cabled fibres. These methods do not constitute a routine test to be used in the evaluation of optical fibre. The parameters derived from the two methods are not intended to be specified within a detailed fibre specification. The catastrophic failure modes arising and which are described in this document in general occur at bending radii much smaller than specified in the single-mode fibre specification IEC 60793-2-50 or than would be recommended based on mechanical reliability considerations alone. This report includes several annexes, including a discussion on the rationale for the approaches adopted, metrics for assessment, guidance, examples and some conclusions from initial studies.

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62549-2011 PDF

IEC 62549-2011 PDF

$186.00 $371.99