Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture
Introduction: IEC 62580-1 defines the general architecture of the On-board Multimedia and Telematic Subsystems (OMTS), so as to achieve compatibility between subsystems in the same vehicle and between subsystems on-board of different vehicles in the same train. NOTE 1 The acronym OMTS replaces the previous OMMS (On-board MultiMedia Subsystem) definition, due to a change in the title of this standard. The multimedia and telematic system is composed of but not limited to: Video surveillance/CCTV Driver and crew orientated services Passenger orientated services Train operator and maintainer orientated services OMTSs installed in the same vehicle (consist) communicate by means of the consist network. OMTSs, installed in different vehicle (consist) in the same train, communicate by means of the train network. It is likely that each OMTS exchanges information with applications installed on-ground by means of a wireless communication gateway. The on-board communication and the on-board to ground communication are specified by the IEC 61375 series. NOTE 2 Board-to-ground communication is intended as a generic link, with no assumption on the underlying technology (radio, satellite or other). As illustrated in Figure 1, the IEC 62580 series is structured as follows: IEC 62580-1: General architecture IEC 62580-2: Video surveillance/CCTV services Driver and crew orientated services, passenger orientated services and train operator/maintainer orientated services are matters of standardisation which can
Scope: This part of IEC 62580 specifies the general architecture of the On-board Multimedia and Telematic Subsystem, which includes four categories of multimedia and telematic subsystems identified as: Video surveillance/CCTV Driver and crew orientated services Passenger orientated services Train operator and maintainer orientated services This part establishes: the boundary between the OMTS and the on-board communication system, as described by the IEC 61375 series the methodology to describe an OMTS in terms of abstract model the general principles and the basic requirements to specify the services provided/needed by each category the approach to ensure interoperability between services This part gives guidelines for: OMTS classification functional breakdown structuring system breakdown structuring formal specification of an OMTS This part is applicable to any type of train, e.g. open trains, multiple unit trains and closed trains. NOTE The general architecture provides a common basis for the application categories defined in part 2 and possible future parts of this series of standards. Consequently, the approach is homogeneous for all multimedia and telematic subsystems addressed by this series of standards.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- Introduction