Nanomanufacturing – Key control characteristics Part 3-1: Luminescent nanomaterials – Quantum efficiency
Introduction: One of the principal drivers of solid-state lighting (SSL) is the potential efficiency of the illumination devices to convert electricity into light. Incandescent and fluorescent lighting devices are only about 5 % to 30 % efficient, with incandescent lighting having the lowest efficiency. Since a significant portion of all electricity consumed is used in providing lighting, increasing the efficiency of lighting devices will have a huge impact on the world’s energy consumption. The luminous efficiency of SSL devices is a critical measurement of their overall efficiency, and standard methods to perform these measurements have been established and were essential to producing reliable product information for manufacturers and consumers. The same is true of the luminescent materials on which these light-emitting diode (LED) manufacturers rely; however, no such standard currently exists. This standard provides SSL manufacturers a universal means for comparing luminescent nanomaterials from different suppliers, and potentially for luminescent materials for LEDs in general. The most common SSL devices are composed of a blue light-emitting diode (LED) and a luminescent material. The blue LED optically excites the luminophore, which will radiate light of the appropriate colour or colours to yield the desired white spectrum. This device, termed a phosphor-converted light emitting diode (or pc-LED), converts the electricity indirectly into white light by first creating blue light and th
Scope: This part of IEC 62607 describes the procedures to be followed and precautions to be observed when performing reproducible measurements of the quantum efficiency of luminescent nanomaterials. Luminescent nanomaterials covered by this method include nano- objects such as quantum dots, nanophosphors, nanoparticles, nanofibers, nanocrystals, nanoplates, and structures containing these materials. The nanomaterials may be dispersed in either a liquid state (e.g., colloidal dispersion of quantum dots) or solid-state (e.g., nanofibers containing luminescent nanoparticles). This standard covers both relative measurements of liquid state luminescent nanomaterials and absolute measurements of both solid and liquid state nanomaterials.
Contents:
- FOREWORD
- INTRODUCTION
- Scope