IEC 62640-2015 PDF

IEC 62640-2015 PDF

Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

$472.88 $945.75 -50%
Product Code: IEC 62640
Stock In Stock
Edition: 1.1
Published: 05/2015
Number of Pages: 538
File Size: 1 file, 3 Bytes

Available Options

Product Description

Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

Introduction: IEC series 61008 and IEC 61009 are applicable to residual current devices having one to four poles used in any part of an electrical installation. These devices may be installed either at the origin of a whole installation or upstream of one or several circuits of a fixed installation or upstream of a circuit powering one or more socket-outlets, or be integrated in the same enclosure as a socket-outlet. Such residual current devices are able to provide fault protection (protection against indirect contact), additional protection (protection against direct contact) if the rated residual current is equal to or less than 30 mA and protection against fire hazard due to a persistent earth leakage current without the operation of the overcurrent protection. Equipment meeting the requirements of the series IEC 61008 or IEC 61009 ensure isolation, withstand high levels of electromagnetic disturbances for household and similar applications and allow safe use of an electrical installation. Although the series IEC 61008 and IEC 61009 may be applicable to “residual current devices integrated in socket-outlets” it is acknowledged that due to the specific use and location of a socket-outlet, at the boundary of the fixed installation and immediately upstream of electrical equipment powered through a plug inserted into the socket-outlet, these devices require different features. The residual current device at socket-outlet level is normally intended to be installed by skilled or instructed p

Scope: This International Standard applies to residual current-operated devices (RCD) incorporated in, or specifically intended for use with two pole socket-outlets, with or without earthing contact for household and similar uses (SRCD: socket-outlet residual current devices). SRCDs, according to this standard, are intended to be used in single phase systems such as phase to neutral or phase to phase or phase to earthed middle conductor. SRCDs are only intended to provide additional protection downstream of the SRCD. SRCDs are intended for use in circuits where the fault protection (indirect contact protection) is already assured upstream of the SRCD. NOTE 1 For example, fault protection (indirect contact protection) can be covered as follows: – in TT systems, by upstream RCBOs or RCCBs according to IEC 61008-1 and IEC 61009-1; – in a TN system, an overcurrent protective device can be used upstream. NOTE 2 In the United States, there is no requirement for providing indirect contact protection upstream of an SRCD. NOTE 3 In Switzerland these devices are not allowed for protective measures according to the national installation rules. SRCDs are neither intended to provide an isolation function nor intended to be used in IT systems. NOTE 4 For SRCDs intended to provide isolation or fault protection, or to be used in IT systems, IEC 61008-1 or IEC 61009-1 should be used, as applicable, in conjunction with IEC 60884-1. NOTE 5 Requirements and testing for SRCDs intended to be used in IT systems are under consideration. SRCDs are not used in distribution boards. They are not intended for the protection of a complete distribution circuit or a complete final circuit. These products are intended to be installed in boxes in compliance with IEC 60670-1, or in cable trunking systems in compliance with the IEC 61084 series, or in power track systems in compliance with the IEC 61534 series, or in boxes according to one of the above standards adjacent to socket-outlet boxes. They are not intended to be used in enclosures or distribution boards in conformity with IEC 60670-24, IEC 61439-1 or IEC 60439-3. RCDs for household and similar use not covered by the scope of this standard are c

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62640-2015 PDF

IEC 62640-2015 PDF

$472.88 $945.75