IEC 62701-2014 PDF

IEC 62701-2014 PDF

Fluids for electrotechnical applications-Recycled mineral insulating oils for transformers and switchgear

$50.44 $100.88 -50%
Product Code: IEC 62701
Stock In Stock
Edition: 1.0
Published: 03/2014
Number of Pages: 32
File Size: 1 file, 282 Bytes

Available Options

Product Description

Fluids for electrotechnical applications – Recycled mineral insulating oils for transformers and switchgear

Introduction: Health and safety This International Standard does not purport to address all the safety problems associated with its use. It is the responsibility of the user of the standard to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. The mineral insulating oils which are the subject of this standard should be handled with due regard to personal hygiene. Direct contact with the eyes may cause irritation. In the case of eye contact, irrigation with copious quantities of clean running water should be carried out and medical advice sought. Some of the tests specified in this standard involve the use of processes that could lead to a hazardous situation. Attention is drawn to the relevant standard for guidance. Environment This standard is applicable rise to mineral insulating oils, chemicals and used sample containers. The disposal of these items shall be carried out according to the local regulations with regard to the impact on the environment. Every precaution should be taken to prevent release of mineral insulating oil into the environment.

Scope: This International Standard specifies requirements for recycled mineral insulating oils intended for use in transformers, switchgear, and similar electrical equipment in which oil is required for insulation and heat transfer. These oils are produced by processes employed offsite. Oils treated and reconditioned on-site are not within the scope of this standard. Oils with and without additives are within the scope of this standard. Such oils will have originally been supplied in compliance with a recognized unused mineral insulating oil specification. This standard does not differentiate between the methods used to recycle mineral insulating oil. This standard does not apply to mineral insulating oils used as impregnates in cables or capacitors. For the purpose of this standard the following subclauses of IEC 60296:2012 apply: 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9; 4.1, 4.3, 4.4; 5.1, 5.5; 6.1, 6.2, 6.4, 6.5, 6.6, 6.8, 6.9, 6.10, 6.11.1, 6.11.3, 6.11.4, 6.12, 6.14, 6.15, 6.16; 7.1. NOTE Some types of re-refined oils are equivalent to unused oils in terms of performance, in which case IEC 60296 is applicable. This should be stated by the manufacturer.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 6.10 Stray gassing of oil

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62701-2014 PDF

IEC 62701-2014 PDF

$50.44 $100.88