Nuclear facilities – Instrumentation and control important to safety – Radiation monitoring systems (RMS): Characteristics and lifecycle
Introduction: a) Technical background, main issues and organisation of the Standard This IEC standard sets out the requirements for the lifecycle management of radiation monitoring systems (RMS) installed in the nuclear facilities (e.g. nuclear power plants, nuclear fuel storage and processing sites). This document is applicable to the equipment of RMS and intended for use during normal operations, anticipated operational occurrence (AOO), design basis accidents (DBA) and design extension conditions (DEC) including severe accidents (SA). The document is intended for use by operators of nuclear facilities (utilities), systems evaluators and by licensors. b) Situation of the current Standard in the structure of the IEC SC 45A standard series IEC 62705 is the third level in the hierarchy of SC 45A standards. This document provides guidance on the application of existing IEC/ISO standards covering design and qualification of system and equipment for RMS. This document is an application supplement of IEC 61513 as shown in Annex B, and it is not intended that this document limits the application of other IEC 61513 requirements to RMS lifecycle. For general requirements and guidance, the following standards provide requirements and guidance for RMS. IEC 61513 is the first level standard of SC 45A standards, and provides general requirements for I&C systems and equipment that are used to perform functions important to safety in nuclear facilities. IEC 61226 provides the criteria for classification
Scope: Sampling (Normal operation) Calibration (Normal operation) Normal operation, AOO DBA DEC Normal operation Radioactive noble gas off-line monitoring ISO 2889 ISO 4037-1, ISO 4037-3 N/A IEC 60951-1, IEC 60951-2 N/A IEC 62302, IEC 60761-1, IEC 60761-3 Radioactive aerosol off-line monitoring ISO 2889 ISO 4037-1, ISO 4037-3 N/A IEC 60951-1, IEC 60951-2 N/A IEC 60761-1, IEC 60761-2 Radioactive iodine off-line monitoring ISO 2889 ISO 4037-1, ISO 4037-3 N/A IEC 60951-1, IEC 60951-2 N/A IEC 60761-1, IEC 60761-4 Liquid off-line monitoring N/A N/A N/A N/A N/A IEC 60861 Tritium off-line monitoring N/A N/A N/A N/A N/A IEC 62303, IEC 60761-1, IEC 60761-5 On-line or in-line monitoring N/A ISO 4037-1, ISO 4037-3 IEC 60768 IEC 60951-1, IEC 60951-4 N/A N/A Area monitoring N/A ISO 4037-1, ISO 4037-3 IEC 61031 IEC 60951-1, IEC 60951-3 IEC 60532 Centralized system N/A N/A IEC 61504, IEC 60960 N/A IEC 61559-1 Classification/basi c requirements N/A N/A IEC 61513, IEC 60880, IEC 60987, IEC 61226, IEC 62138, IEC 62566, IEC 62566-2, IEC 62645, IEC 61250 N/A N/A Qualification N/A N/A IEC/IEEE 60780-323, IEC/IEEE 60980-344, IEC 62003 N/A IEC 62706 c) Recommendations and limitations regarding the application of this Standard It is important to note that this document establishes no additional functional requirements for systems important to safety. Where requirements are given in this standard, they refer generally to the need to apply other IEC and ISO Standards and specific functional and technical requirements contained in these standards. To ensure that the document will continue to be relevant in future years, the emphasis has been placed on issues of principle, rather than specific technologies. d) Description of the structure of the IEC SC 45A standard series and relationships with other IEC documents and other bodies documents (IAEA, ISO) The IEC SC 45A standard series comprises a hierarchy of four levels. The top-level documents of the IEC SC 45A standard series are IEC 61513 and IEC 63046. IEC 61513 provides general requirements for instrumentation and control (I&C) systems and equipment that are used to perform functions important to safety in nuclear power plants (NPPs). IEC 630
Contents:
- FOREWORD
- INTRODUCTION
- Scope