Luminaire performance – Part 2-1: Particular requirements – LED luminaires
Introduction: This document acknowledges the need for relevant tests for luminaires using LED as an electrical light source. This document is seen in close context with the publication of simultaneously developed performance standards for luminaires in general and for LED modules. This document does not consider luminaires designed for LED lamps, which are covered in IEC 62722-1. Changes in LED luminaires standards have an impact on LED module standards and vice versa, due to the behaviour of LED. Therefore, for the development of this document, the mutual consultancy of experts of both products has taken place. The provisions in this document represent the technical knowledge of experts from the fields of the semiconductor (LED chip) industry and of the traditional electrical light sources and luminaires. As this document has been simultaneously developed and edited with the standard for LED modules (IEC 62717), where appropriate, the compliance of the LED modules with the provisions of IEC 62717 can be transferred to the whole luminaire.
Scope: This part of IEC 62722 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general lighting purposes. Semi-luminaires are not covered under the scope of this document. For some types of luminaires (e.g. decorative or household) the provision of performance data under the scope of this document is not appropriate. In this document, the following types of LED luminaires are distinguished. Type A – Luminaires using LED modules where compliance with IEC 62717 is given. Type B – Luminaires using LED modules where compliance with IEC 62717 is not given. Luminaires using an LED lamp are covered in IEC 62722-1 and are not within the scope of this document. The requirements of this document relate to type testing. This document covers LED luminaires using LED modules, based on inorganic LED technology that produces white light. It does not cover luminaires using light sources based on OLED technology (organic LED technology). The lifetime of LED luminaires is in most cases much longer than the practical test times. Consequently, the verification of manufacturer’s lifetime claims is out of the scope of this document. Instead of lifetime validation, this document has opted for lumen maintenance categories at a defined finite test time. Therefore, the category number does not imply a prediction of achievable lifetime. The categories are lumen-depreciation character categories showing behaviour in agreement with the manufacturer’s information which is provided before the test is started.
Contents:
- FOREWORD
- INTRODUCTION
- Scope