IEC 62733-2015 PDF

IEC 62733-2015 PDF

Programmable components in electronic lamp controlgear-General and safety requirements

$186.00 $371.99 -50%
Product Code: IEC 62733
Stock In Stock
Edition: 1.0
Published: 05/2015
Number of Pages: 88
File Size: 0 files

Available Options

Product Description

Programmable components in electronic lamp controlgear – General and safety requirements

Introduction: This International Standard provides safety requirements and test methods for programmable components when in electronic lamp controlgear. It provides additional safety requirements for electronic lamp controlgear containing programmable components to the requirements of IEC 61347 series. In general, the two means of protection safety principle is used for protection against hazards such as electric shock. Consequently one single fault condition or abnormal operation of the electrical equipment will not lead to a hazardous situation. Until recent technology, two means of protection have been realized in traditional hardware. Examples are the provision of basic insulation and supplementary insulation between hazardous live parts and accessible parts, and provision of basic insulation combined by disconnection of the mains supply by a fuse. Nowadays however programmable components (with embedded software) may be used as a measure to provide safety under normal conditions, single fault conditions and/or abnormal operation. Since the traditional lighting standards do not provide requirements for programmable components, this standard has been drawn up. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions. It also covers conditions for electromagnetic phenomena that can be expected in pract

Scope: This International Standard provides general and safety requirements for programmable components used in products covered by IEC 61347. The requirements of this standard are only applicable to the programmable components (including its embedded software) in the electronic lamp controlgear. For other electric/electronic circuits and their components in the electronic lamp controlgear, the requirements of IEC 61347 series apply.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62733-2015 PDF

IEC 62733-2015 PDF

$186.00 $371.99