Semiconductor devices – Semiconductor interface for human body communication – Part 4: Capsule endoscope
Introduction: IEC 62779-1, IEC 62779-2 and IEC 62779-3 define the general requirements, measurement method and functional type of a semiconductor interface for human body communication. They include the general and functional specifications of the interface, the electrical performances of an electrode, and the operational conditions of the interface. However, an in- body to on-body channel for a capsule endoscope using galvanic coupling human body communication (HBC) is different from the channel that is described in IEC 62779-1, IEC 62779-2 and IEC 62779-3 using capacitive coupling human body communication (i.e. channel properties, such as signal loss and signal propagation mechanism, are different). Therefore, the semiconductor interface covered by IEC 62779-1, IEC 62779-2 and IEC 62779-3 cannot be used for the capsule endoscope using galvanic coupling human body communication. A common interface for a capsule endoscope using human body communication should be defined to secure communication compatibility between various capsule endoscope devices and receiving devices that are implemented on or inside the human body.
Scope: This part of IEC 62779 defines general requirements on the electrical performances of a semiconductor interface for capsule endoscope using galvanic coupling human body communication. It includes general and functional specifications of the interface. The semiconductor interface that is covered in this document is the interface to handle or deliver an electrical signal between the capsule endoscope inside the human body and the HBC modem in the receiving device outside the human body. NOTE Additional information on capsule endoscope using the human body communication is provided in Annex A.
Contents:
- FOREWORD
- INTRODUCTION
- Scope