Vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts – Particular requirements
Introduction: This document recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturer's instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This document takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. IEC 62784 contains the result of the work of IEC SC61J JWG1 MT 62784. The joint working group was established in April 2009 to MT 62784 prepares, or ensures the coordination of (within SC61J) international standards and specifications for vacuum cleaners and dust extractors in collaboration with TC31, intended for the collection of dusts which present an explosion risk. This document for "vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts" reflects the final agreement of JWG1.
Scope: This International Standard covers electrical mobile motor-operated vacuum cleaners Equipment Protection Level (EPL) Dc. This includes dust extractors, for wet suction or dry suction, intended for commercial indoor use with or without attachments, to collect combustible dust in an explosive dust atmosphere. The requirements for the construction and testing covered by this document are applied in addition to the requirements for commercial and industrial vacuum cleaners in IEC 60335-2-69. This document supplements and modifies the requirements of IEC 60079-0. Whenever a requirement of this standard is in conflict with a requirement of IEC 60079-0 the requirement of this standard will take precedence. The following power systems are covered: mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances. This document does not cover specific hazards associated with extreme ambient temperatures (less than –20 °C or higher than 40 °C) unless otherwise marked by the manufacturer as given in IEC 60079-0. The temperatures shall not exceed the temperature range of –20 °C to +60 °C. This document does not cover motorized cleaning heads for which additional requirements are under consideration. This document does not apply to back-pack vacuum cleaners; vacuum cleaners with a traction drive; vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); spray extraction machines for commercial use (IEC 60335-2-68); hand-held mains-operated electrical garden blowers, vacuums and blower vacuums (IEC 60335-2-100); hand-held and transportable motor-operated electric tools (IEC 62841 series); appliances for medical purposes (IEC 60601-1); machines designed for use in corrosive environments; machines designed for picking up flammable liquids; machines designed for use in explosive environments due to the presence of explosive substances or pyrotechnical products, or unstable chemical substances. IEC 62784:2017+AMD1:2019 CSV – 7 – © IEC 2019
Contents:
- FOREWORD
- INTRODUCTION
- Scope