IEC 62820-2-2017 PDF

IEC 62820-2-2017 PDF

Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS)

$132.41 $264.81 -50%
Product Code: IEC 62820-2
Stock In Stock
Edition: 1.0
Published: 09/2017
Number of Pages: 64
File Size: 1 file, 838 Bytes

Available Options

Product Description

Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS)

Introduction: The IEC 62820 series of standards set out the technical requirements for the composition, functions, performance, test methods of building intercom systems for building entry and application guidelines and consist of five parts: Part 1-1: System requirements – General; Part 1-2: System requirements – Building intercom systems using the internet protocol (IP); Part 2: Requirements for advanced security building intercom systems (ASBIS); Part 3-11: Application guidelines – General; Part 3-22: Application guidelines – Advanced security building intercom systems. IEC 62820-2 specifies higher security requirements, to be used in buildings with advanced security needs that additionally or alternatively apply in respect of those in IEC 62820-1-1 and/or IEC 62820-1-2 which give basic requirements for building intercom systems. Additional requirements and recommendations are those described in IEC 62820-2, but they are not covered by IEC 62820-1-1 neither IEC 62820-1-2. Requirements and recommendations described by IEC 62820-2 have precedence, if also described in IEC 62820-1-1 and/or IEC 62820-1-2. ___________ Under preparation. Stage at the time of publication: IEC/AFDIS 62820-3-1:2017. Under preparation. Stage at the time of publication: IEC/AFDIS 62820-3-2:2017.

Scope: This part of IEC 62820 specifies the technical requirements for the composition, function, performance and testing methods of Advanced Security Building Intercom Systems. This document is applicable for intercom systems used for any advanced security communication in buildings. Advanced security building intercom systems (ASBIS) are used for rapid emergency and danger messages verification by voice communication, warning of a danger, rapid notification of the responsible emergency services/intervention services and for sending instructions on how to proceed. The requirement for a suitable concept is prior risk assessment and a definition of the protection target. A Security management unit (SMU) is a necessary part of an ASBIS. The type of building and the usage of a building have influence on the risk calculation. In this document, the relevant functions and performances are divided into three grades. According to the results of the risk calculation, the security needs will be covered by an individual system profile. NOTE 1 Examples of typical profiles and each grades are defined in IEC 62820-3-2, where a risk calculation is required. NOTE 2 The application of this document does not dispense to comply with the public national regulations concerning emergency systems. NOTE 3 Systems for emergency purposes can be the subject of approval by local authorities.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62820-2-2017 PDF

IEC 62820-2-2017 PDF

$132.41 $264.81