Measurement of internal electric field in insulating materials – Pressure wave propagation method
Introduction: High-voltage insulating structures, especially high-voltage DC cables and capacitors etc., are subjected to charge accumulation and this can lead to electrical breakdown if the electric field produced by the charges exceeds the electrical breakdown threshold. With the trend to multiply power plants, especially green power plants such as wind or solar generators, more cables will be used for connecting these power plants to the grid and share the electric energy between countries. Therefore, a standardized procedure for testing how the internal electric field can be characterized has become essential for the materials used for the cables, and even the structure of these cables when considering electrodes or the junction between cables. The measurement of the internal electric field provides a tool for comparing materials and helps to establish thresholds on the internal electric field for high-voltage applications in order to avoid risks of breakdown as much as possible. The pressure wave propagation (PWP) method has been used by many researchers to measure the space charge distribution and the internal electric field distribution in insulators. However, since experimental equipment, with slight differences, is developed independently by researchers throughout the world, it is difficult to compare the measurement results between the different equipment. The procedure outlined in this document provides a reliable point of comparison between different test results carried out by
Scope: This document provides an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications, by using the pressure wave propagation (PWP) method. It is suitable for a planar and coaxial geometry sample with homogeneous insulating materials of thickness larger or equal to 0,5 mm and an electric field higher than 1 kV/mm, but it is also dependent on the thickness of the sample and the pressure wave generator.
Contents:
- FOREWORD
- INTRODUCTION
- Scope